Dell Alienware M17x R4 Owner's Manual - Page 60
Replacing the Display, Assembly
View all Dell Alienware M17x R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
34 Replacing the Display Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance. Procedure 1 Place the display assembly in position and replace the screws that secure the display assembly to the computer base. 2 Route the display cable, camera cable, infrared cable, wirelessHD card cable, and Mini-Card antenna cables through the routing guides on the palm rest assembly. 3 Connect the display cable to the connector on the system board. 4 Tighten the captive screws that secure the display cable to the system board. 5 Connect the camera cable and infrared cable to the respective system board connectors. Postrequsites 1 Connect the wirelessHD card cable to the connector on the wirelessHD card. See "Replacing the WirelessHD Card" on page 54. 2 Connect the Mini-Card antenna cables to the Mini-Card. See "Replacing the Mini-Card" on page 51. 3 Replace the keyboard. See "Replacing the Keyboard" on page 48. 4 Replace the center control cover. See "Replacing the Center Control Cover" on page 44. 5 Replace the compartment door. See "Replacing the Compartment Door" on page 15. 6 Replace the battery pack. See "Replacing the Battery Pack" on page 13. 7 Follow the instructions in "After Working Inside Your Computer" on page 11. 60 | Replacing the Display Assembly