Dell C1765NFW Dell Users Guide - Page 134

Scan to PC Purpose: To specify the client when scanning data. Values: FTP Client SMB Client Connection Time-Out FTP Passive Connection Time-Out Sets the connection time-out period from 1 to 60 seconds. Sets whether to enable the FTP Passive mode. Sets the connection time-out period from 1 to 60 seconds. Reset Print Server Purpose: To initialize NVM (non-volatile memory) for the network feature and reboot the printer. You can also initialize the NVM of the printer from Reset Defaults in the Printer Settings menu. Values: Initialize NIC NVRAM Click Start to initialize NVM. Network settings will revert to the factory default settings and memory and restart printer. reboot the network capability. Restart Printer Click Start to reboot the printer. Security The Security tab contains the Set Password and IP Filter (IPv4) pages. Set Password Purpose: To set or change the password that is required to access the setup parameters of the printer from the Dell Printer Configuration Web Tool. This page can also be displayed by clicking Set Password in the left frame. NOTE: If you forgot your password, initialize NVM (non-volatile memory) to restore the password to the default (NULL). See "Reset Print Server" on page 132. NOTE: When you change the password to lock the operator panel, set the password from Panel Lock Set in the Printer Settings. Values: Administrator Password Re-enter Administrator Password Sets the password using up to 10 alphanumeric characters. The password will appear as asterisks (*) in the field when it is entered. Enter the password again to confirm. 132 Dell™ Printer Configuration Web Tool