Dell Dimension 2400 Owner's Manual - Page 61
Remove two extra alignment screws, shown in the illustration on from the front
View all Dell Dimension 2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
tabs (2) insert 8 Ensure that the jumper setting on the new drive is set for "cable select" (see the documentation that came with the drive for information). 9 Remove two extra alignment screws, shown in the illustration on page 62, from the front of the computer and insert them into the drive. drive alignment screws (2) NOTE: Some computers come with only two extra alignment screws; others come with four. You only need two alignment screws for this procedure. Removing and Installing Parts 61
Removing and Installing Parts
61
8
Ensure that the jumper setting on the new drive is set for "cable select" (see the
documentation that came with the drive for information).
9
Remove two extra alignment screws, shown in the illustration on page 62, from the front of
the computer and insert them into the drive.
NOTE:
Some computers come with only two extra alignment screws; others come with four. You only
need two alignment screws for this procedure.
tabs (2)
insert
drive
alignment screws (2)