Dell Dimension 9200 Owner's Manual - Page 104
General Installation Guidelines, Hard Drive
View all Dell Dimension 9200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
General Installation Guidelines Connect the hard drives to the connectors labeled "SATA0" and "SATA1", starting with SATA0. Connect CD/DVD drives to the connectors labeled "SATA4" or "SATA5", starting with SATA4. Serial ATA hard drives and CD/DVD drives are connected to the connectors labeled "SATA0" to "SATA5" on the system board. When connecting and disconnecting a serial ATA cable, hold the cable by the connector at each end. Hard Drive CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a foam pad, that will sufficiently cushion it. If you are replacing a hard drive that contains data, back up your files before you begin this procedure 104 Removing and Installing Parts