Dell Dimension 9200 Owner's Manual - Page 127
System Setup, Overview, Entering System Setup - bios password
View all Dell Dimension 9200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Environmental Temperature: Operating Storage Relative humidity Maximum vibration: Operating Storage Maximum shock: Operating Storage Altitude: Operating Storage 10° to 35°C (50° to 95°F) -40° to 65°C (-40° to 149°F) 20% to 80% (noncondensing) 0.25 G at 3 to 200 Hz at 0.5 octave/min 0.5 G at 3 to 200 Hz at 1 octave/min bottom half-sine pulse with a change in velocity of 20 inches/sec (50.8 cm/sec) 27-G faired square wave with a velocity change of 200 inches/sec (508 cm/sec) -15.2 to 3048 m (-50 to 10,000 ft) -15.2 to 10,668 m (-50 to 35,000 ft) System Setup Overview Use system setup as follows: • To change the system configuration information after you add, change, or remove any hardware in your computer • To set or change a user-selectable option such as the user password • To read the current amount of memory or set the type of hard drive installed • To flash the BIOS with an update Before you use system setup, it is recommended that you write down the system setup screen information for future reference. NOTICE: Unless you are an expert computer user, do not change the settings for this program. Certain changes can cause your computer to work incorrectly. Entering System Setup 1 Turn on (or restart) your computer. 2 When the blue DELL™ logo is displayed, watch for the F2 prompt to appear. Appendix 127