Dell External OEMR R410 Technical Guide - Page 41
LED Indicators, Optical Drives, Tape Drives
View all Dell External OEMR R410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Dell 11.5 LED Indicators LED indicator for hotswap HDD configuration LED indicator for cabled HDD configuration Figure 24. LED Indicators A green LED located on the system control panel in the front of the enclosure indicates when activity occurs on any integrated SATA device connected to the on board SATA ports. Using an add-in SAS 6/iR card, the HDD LED is also activated. 11.6 Optical Drives R410 supports a SATA interface DVD-ROM or DVD+/-RW. Refer to Table 2. 11.7 Tape Drives R410 does not support an internal backup device. Only external backup device is supported. Refer to Table 2 for the supported devices. PowerEdge R410 Technical Guide 41
Dell
PowerEdge R410 Technical Guide
41
11.5
LED Indicators
Figure 24.
LED Indicators
A green LED located on the system control panel in the front of the enclosure indicates when activity
occurs on any integrated SATA device connected to the on board SATA ports. Using an add-in SAS
6/iR card, the HDD LED is also activated.
11.6
Optical Drives
R410 supports a SATA interface DVD-ROM or DVD+/-RW.
Refer to Table 2
.
11.7
Tape Drives
R410 does not support an internal backup device. Only external backup device is supported.
Refer to Table 2 for the supported devices.
LED indicator for cabled
HDD configuration
LED indicator for hot-
swap HDD configuration