Dell External OEMR R410 Technical Guide - Page 46

Rack View

Get Dell External OEMR R410 PDF manuals and user guides View all Dell External OEMR R410 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Dell  Both the CMA and the tray mount without the use of tools via simple and intuitive snap-in designs 13.4 Rack View The R410 sliding rails are a ―stab-in‖ design, meaning that the inner (chassis) rail members must first be attached to the sides of the system prior to inserting them into the middle (intermediate) and outer (cabinet) rail members installed in the rack. The CMA can be mounted to either side of the rails without the use of tools or the need for conversion, but it is recommended that it be mounted on the side opposite the power supplies to allow easier access to the power supplies for service or replacement. Figure 28. R410 Mounted in the A3 Sliding Rails with the CMA The R410 static rails are also a ―stab-in‖ design, but unlike the sliding rails, they do not include middle (intermediate) rail members. After the inner (chassis) rail members have been attached to the sides of the chassis, they are inserted directly into the outer (cabinet) rail members installed in the rack. Figure 29. R410 Mounted in the A4 Static Rails in 2-post Center Mount Configuration PowerEdge R410 Technical Guide 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Dell
PowerEdge R410 Technical Guide
46
Both the CMA and the tray mount without the use of tools via simple and intuitive snap-in
designs
13.4
Rack View
The R410 sliding rails are a ―stab
-
in‖ design, meaning that the inner (chassis) rail members must
first
be attached to the sides of the system prior to inserting them into the middle (intermediate) and
outer (cabinet) rail members installed in the rack.
The CMA can be mounted to either side of the rails
without the use of tools or the need for conversion, but it is recommended that it be mounted on the
side opposite the power supplies to allow easier access to the power supplies for service or
replacement.
Figure 28.
R410 Mounted in the A3 Sliding Rails with the CMA
The R410 static rails
are also a ―stab
-
in‖ de
sign, but unlike the sliding rails, they do not include
middle (intermediate) rail members.
After the inner (chassis) rail members have been attached to
the sides of the chassis, they are inserted directly into the outer (cabinet) rail members installed in
the rack.
Figure 29.
R410 Mounted in the A4 Static Rails in 2-post Center Mount Configuration