Home » Dell Manuals » Laptops » Dell Inspiron 14 AMD M4040 » Manual Viewer

Dell Inspiron 14 AMD M4040 Owner's Manual

Dell Inspiron 14 AMD M4040 Manual

View all Dell Inspiron 14 AMD M4040 manuals

Add to My Manuals
Save this manual to your list of manuals

Dell Inspiron 14 AMD M4040 manual content summary:

Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 1
Dell Inspiron M4040/14-N4050 Owner's Manual Regulatory model: P22G Regulatory type: P22G001; P22G002
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 2
A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property . © 2011 Dell Inc. All rights reserved. Trademarks used in this text: Dell™, the DELL logo, and Inspiron™ are trademarks of Dell Inc.; Bluetooth®
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 3
Tools 9 Turning Off Your Computer 9 Before Working Inside Your Computer 10 2 Battery 13 Removing the Battery 13 Replacing the Battery 14 3 Keyboard 15 Removing the Keyboard 15 Replacing the Keyboard 17 4 Memory Module(s 19 Removing the Memory Module(s 19 Replacing the Memory
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 4
Replacing the Optical Drive 24 6 Palm-Rest Assembly 25 Removing the Palm-Rest Assembly 25 Replacing the Palm-Rest Assembly 28 7 Power Button Board 31 Removing the Power Button Board 31 Replacing the Power Button Board 32 8 Hard Drive 33 Removing the Hard Drive 33 Replacing the Hard Drive
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 5
USB Board 48 13 Thermal Cooling Assembly 49 Removing the Thermal Cooling Assembly 49 Replacing the Thermal Cooling Assembly 50 14 Processor Module (For Inspiron 14-N4050 Only) 51 Removing the Processor Module 51 Replacing the Processor Module 52 15 Hinge Cover 55 Removing the Hinge Cover
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 6
the Camera Module 69 Replacing the Camera Module 70 18 System Board 73 Removing the System Board 73 Replacing the System Board 75 Entering the Service Tag in the BIOS 76 19 Flashing the BIOS 77 6 Contents
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 7
Contents 7
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 8
8 Contents
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 9
1 Before You Begin This manual provides procedures for removing and installing components in your -blade screwdriver • Phillips screwdriver • Plastic scribe • BIOS executable update program available at support.dell.com Turning Off Your Computer CAUTION: To avoid losing data, save and close all
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 10
a component such as a processor by its edges, not by its pins. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. CAUTION: When you disconnect a cable, pull on its connector or
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 11
6 Disconnect all attached devices from your computer. CAUTION: To help prevent damage to the system board, remove the main battery, see "Removing the Battery" on page 13, before working inside the computer. 7 Remove the battery. See "Removing the Battery" on page 13. 8 Turn the computer top-side up,
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 12
12 Before You Begin
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 13
dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell Dell computer. Do not use batteries designed for other Dell computers. Removing the Battery 1 Follow the instructions
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 14
3 2 1 1 battery release latch 3 battery lock latch 2 battery Replacing the Battery 1 Follow the instructions in "Before You Begin" on page 9. 2 Slide the battery into the battery bay until it clicks into place. 3 Slide the battery lock latch to the lock position. 14 Battery
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 15
dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell working inside the computer. Removing the Keyboard 1 Follow the instructions in "Before You Begin" on page 9. 2 Remove the
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 16
1 2 3 1 plastic scribe 3 keyboard 2 tabs (4) CAUTION: Be extremely careful when removing and handling the keyboard. Failure to do so could result in scratching the display panel. 5 Without pulling hard on the keyboard, hold it towards the display. 6 Lift the connector latch that secures the
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 17
2 1 1 keyboard cable 2 keyboard Replacing the Keyboard 1 Follow the instructions in "Before You Begin" on page 9. 2 Slide the keyboard cable into the connector on the system Close the display and turn the computer over. 6 Replace the battery. See "Replacing the Battery" on page 14. Keyboard 17
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 18
18 Keyboard
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 19
support.dell.com/manuals. NOTE: Memory modules purchased from Dell are covered under your computer warranty. Your computer has two user-accessible SODIMM sockets, labeled DIMM A and DIMM B, that can be accessed from the bottom of the computer. Removing the Memory Module(s) 1 Follow the instructions
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 20
two connectors, install a memory module in the connector labeled "DIMM A" before you install a memory module in the connector labeled "DIMM B." 1 Follow the instructions in "Before You Begin" on page 9. 2 Align the notch in the memory module with the tab in the memory-module connector. 3 Slide the
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 21
2 1 1 tab 2 notch 4 Replace the keyboard. See "Replacing the Keyboard" on page 17. 5 Replace the battery, see "Replacing the Battery" on page 14, or connect the AC adapter to your computer and an electrical outlet. 6 Turn on the computer. As the computer boots, it detects the memory module(s)
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 22
22 Memory
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 23
dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell working inside the computer. Removing the Optical Drive 1 Follow the instructions in "Before You Begin" on page 9. 2 Remove the
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 24
drive 2 screw 4 notch Replacing the Optical Drive 1 Follow the instructions in "Before You Begin" on page 9. 2 Slide the optical drive " on page 17. 5 Replace the battery. See "Replacing the Battery" on page 14. CAUTION: Before turning on the computer, replace all screws and ensure that no stray
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 25
dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell inside the computer. Removing the Palm-Rest Assembly 1 Follow the instructions in "Before You Begin" on page 9. 2 Remove the
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 26
4 Remove the keyboard. See "Removing the Keyboard" on page 15. 5 Remove the three screws on the palm-rest assembly. CAUTION: Pull on the plastic tab on top of the connectors to avoid damaging the connectors. 6 Lift the connector latch that secures the power-button board cable and touch-pad cable to
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 27
1 2 1 power-button board cable 2 touch-pad cable CAUTION: Carefully separate the palm rest from the computer base to avoid damage to the palm rest. 7 Using a plastic scribe, carefully pry out the palm-rest assembly and then ease the palm-rest assembly from the computer base 8 Lift the palm-rest
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 28
2 plastic scribe 9 Remove the power button board. See "Removing the Power Button Board" on page 31. Replacing the Palm-Rest Assembly 1 Follow the instructions in "Before You Begin" on page 9. 2 Replace the power button board. See "Replacing the Power Button Board" on page 32. 3 Align the palm
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 29
8 Replace the battery. See "Replacing the Battery" on page 14. CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Palm-Rest Assembly 29
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 30
30 Palm-Rest Assembly
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 31
dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell the computer. Removing the Power Button Board 1 Follow the instructions in "Before You Begin" on page 9. 2 Remove the battery. See
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 32
palm-rest assembly. 5 Turn the palm-rest assembly over. 6 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest Assembly" on page 28 . 7 Replace the battery. See "Replacing the Battery" on page 14. CAUTION: Before turning on the computer, replace all screws and ensure that
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 33
compatibility or provide support for hard drives from sources other than Dell. NOTE: If you are installing a hard drive from a source other than Dell, you must install an operating system, drivers, and utilities on the new hard drive. Removing the Hard Drive 1 Follow the instructions in "Before You
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 34
4 Slide the hard-drive assembly to the left to disconnect it from the connector on the system board. 5 Lift the hard-drive assembly out of the computer base. 1 1 hard-drive assembly 6 Remove the two screws that secure the hard-drive bracket to the hard drive. 7 Lift the hard-drive bracket away from
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 35
to connect it to the connector on the system board. 7 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest Assembly" on page 28 . 8 Replace the battery. See "Replacing the Battery" on page 14. CAUTION: Before turning on the computer, replace all screws and ensure that no
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 36
36 Hard Drive
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 37
dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell Dell does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell the instructions from step
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 38
Against Electrostatic Discharge" in the safety information that shipped with your computer. 1 2 1 Mini-Card antenna cables (2) 2 tab Replacing the Mini-Card 1 Follow the instructions in "Before You Begin" on page 9. 2 Remove the new Mini-Card from its packaging. 38 Wireless Mini-Card
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 39
scheme for the Mini-Cards supported by your computer. Connectors Cable Color Scheme white black 6 Follow the instructions from step 3 to step 7 in "Replacing . See "Replacing the Battery" on page 14. CAUTION: Before turning on the computer, replace the drivers and utilities for your computer, as required.
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 40
40 Wireless Mini-Card
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 41
due to servicing that is not authorized by Dell is not covered by your warranty. CAUTION: To help prevent damage to the system board, remove the main battery, see "Removing the Battery" on page 13, before working inside the computer. Removing the Audio Board 1 Follow the instructions in "Before
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 42
-Card. See "Replacing the Mini-Card" on page 38. 5 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest Assembly" on page 28. 6 Replace the battery. See "Replacing the Battery" on page 14. CAUTION: Before turning on the computer, replace all screws and ensure that no
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 43
dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell 3 Follow the instructions from step 3 to step 8 in "Removing the Palm-Rest Assembly" on page 25. For Inspiron 14-N4050: a Lift
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 44
1 2 3 4 1 battery socket 3 coin-cell battery cable 2 coin-cell battery 4 audio-board cable For Inspiron M4040: a Using a plastic scribe, gently pry the coin-cell out of the battery socket on the system board. b Lift the coin-cell battery out of the
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 45
cell battery Replacing the Coin-Cell Battery 1 Follow the instructions in "Before You Begin" on page 9. For Inspiron M4040: With the positive side up, snap the coin-cell battery into the battery socket on the system board. For Inspiron 14-N4050: a Slide the coin-cell battery into the battery socket
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 46
46 Coin-Cell Battery
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 47
a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not 9. 2 Remove the battery. See "Removing the Battery" on page 13. 3 Follow the instructions from step 3 to step 8 in "Removing the Palm-Rest Assembly" on page 25. 4
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 48
drive. See "Replacing the Optical Drive" on page 24. 6 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest Assembly" on page 28. 7 Replace the battery. See "Replacing the Battery" on page 14. CAUTION: Before turning on the computer, replace all screws and ensure that no
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 49
dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell vary. Removing the Thermal Cooling Assembly 1 Follow the instructions in "Before You Begin" on page 9. 2 Remove the battery. See "
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 50
Connect the fan cable to the connector on the system board. 4 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest Assembly" on page 28. 5 Replace the battery. See "Replacing the Battery" on page 14. CAUTION: Before turning on the computer, replace all screws and ensure that no
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 51
(For Inspiron 14-N4050 Only) WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: Only a certified service
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 52
1 Follow the instructions in "Before You Begin" on page 9. NOTE: If you install a new processor, a new thermal assembly including an affixed thermal pad or a new thermal pad along with documentation to illustrate proper installation is shipped. 52 Processor Module (For Inspiron 14-N4050 Only)
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 53
Assembly" on page 50. 5 Follow the instructions from step 3 to step 7 in " 14. CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Processor Module (For Inspiron 14-N4050
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 54
54 Processor Module (For Inspiron 14-N4050 Only)
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 55
dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell working inside the computer. Removing the Hinge Cover 1 Follow the instructions in "Before You Begin" on page 9. 2 Remove the
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 56
4 Turn the computer over. 5 Pry the hinge cover off the computer base. 1 56 Hinge Cover
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 57
hinge cover Replacing the Hinge Cover 1 Follow the instructions in "Before You Begin" on page 9. 2 hinge cover to the computer base. 5 Replace the battery. See "Replacing the Battery" on page 14. CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 58
58 Hinge Cover
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 59
dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell Assembly Removing the Display Assembly 1 Follow the instructions in "Before You Begin" on page 9. 2 Remove guides. Display 59
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 60
1 2 3 1 display cable 3 Mini-Card antenna cables 2 Mini-Card 10 Remove the two screws that secure the display assembly to the computer base. 11 Lift and remove the display assembly out of the computer base. 60 Display
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 61
Assembly 1 Follow the instructions in "Before You Begin" on page 9. 2 Place the display assembly in position and replace the two screws that secure the display assembly to the computer base. 3 Route the display cable and Mini-Card antenna cables through the routing guides. 4 Connect the display
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 62
"Replacing the Battery" on page 14. CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Display Bezel Removing the Display Bezel 1 Follow the instructions in "Before You Begin
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 63
in damage to the computer. Display Panel Removing the Display Panel 1 Follow the instructions in "Before You Begin" on page 9. 2 Remove the display assembly. See antenna cables routing and remove them from the routing guides on the display hinges. 6 Remove the six screws that secure the display panel
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 64
5 4 3 2 1 1 display cable 3 display panel 5 screws (6) 2 display cover 4 Mini-Card antenna cables 7 Lift the display panel off the display cover. 8 Remove the four screws (two on each side) that secure the display-panel brackets to the display panel. 64 Display
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 65
1 2 1 screws (4) 2 display-panel brackets (2) 9 Turn the display panel over and place it on a clean surface. 10 Peel and lift the tape that secures the display cable to the display-board connector and disconnect the display cable. 11 Make a note of the display cable routing and peel the cable
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 66
2 display-board connector Replacing the Display Panel 1 Follow the instructions in "Before You Begin" on page 9. 2 Attach the screws. 7 Route the display cable and Mini-Card antenna cables through the routing guides on the display hinges. 8 Connect the camera cable to the connector on the camera
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 67
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Display 67
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 68
68 Display
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 69
dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell the computer. Removing the Camera Module 1 Follow the instructions in "Before You Begin" on page 9. 2 Remove the battery. See
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 70
2 3 1 1 camera module 3 tabs (2) 2 camera cable Replacing the Camera Module 1 Follow the instructions in "Before You Begin" on page 9. 2 Connect the camera cable to the connector on the camera module. 3 Use the alignment posts on the display cover
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 71
optical drive. See "Replacing the Optical Drive" on page 24. 9 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest Assembly" on page 28. 10 Replace the battery. See "Replacing the Battery" on page 14. CAUTION: Before turning on the computer, replace all screws and ensure that
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 72
72 Camera Module
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 73
dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell See "Removing the Optical Drive" on page 23. 7 Follow the instructions from step 3 to step 8 in "Removing the Palm-Rest Assembly
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 74
cable 2 AC-adapter cable 4 coin-cell battery cable 6 USB-board cable 13 Remove the two screws that secure the system board to the computer base. 14 Lift the system board at an angle and release the connectors on the system board from the slots on the computer base. NOTE: Based on
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 75
. See "Replacing the Processor Module" on page 52. 6 Replace the thermal cooling assembly. See "Replacing the Thermal Cooling Assembly" on page 50. 7 Follow the instructions from step 5 to step 6 in "Replacing the Hard Drive" on page 35. 8 Replace the Mini-Card. See "Replacing the Mini-Card" on page
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 76
instructions 13 Replace the battery. See "Replacing the Battery" on page 14. 14 Replace any removed cards or blanks in the 3-in-1 media card Service Tag into the BIOS of the replacement system board. 16 Enter the service tag. See "Entering the Service Tag in the BIOS" on page 76. Entering the Service
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 77
is available or when replacing the system board. To flash the BIOS: 1 Turn on the computer. 2 Go to support.dell.com/support/downloads. 3 Locate the BIOS update file for your computer: NOTE: The Service Tag for your computer is located on a label at the bottom of your computer. If you have your
Dell Inspiron 14 AMD M4040 | Owner's Manual - Page 78
8 Double-click the file icon on the desktop and follow the instructions on the screen. 78 Flashing the BIOS

Section	Page
Dell Inspiron M4040/14-N4050 Owner’s Manual	1
Notes, Cautions, and Warnings	2
Contents	3
1	9
Before You Begin	9
Recommended Tools	9
Turning Off Your Computer	9
1 Save and close all open files and exit all open programs.	9
2 Click Start and then click Shut Down.	9
3 Ensure that the computer is turned off. If your computer did not automatically turn off when you shut down the operating system, press and hold the power button until the computer turns off.	9
Before Working Inside Your Computer	10
1 Ensure that the work surface is flat and clean to prevent the computer cover from being scratched.	10
2 Turn off your computer, see \	10
3 Disconnect all telephone or network cables from the computer.	10
4 Press and eject any installed cards from the 3-in-1 media card reader.	10
5 Disconnect your computer and all attached devices from their electrical outlets.	10
6 Disconnect all attached devices from your computer.	11
7 Remove the battery. See \	11
8 Turn the computer top-side up, open the display, and press the power button to ground the system board.	11
2	13
Battery	13
Removing the Battery	13
1 Follow the instructions in \	13
2 Turn off the computer and turn it over.	13
3 Slide the battery lock latch to the unlock position until it clicks into place.	13
4 Slide and hold the battery release latch in the unlock position.	13
5 Slide and lift the battery out of the battery bay.	13
Replacing the Battery	14
1 Follow the instructions in \	14
2 Slide the battery into the battery bay until it clicks into place.	14
3 Slide the battery lock latch to the lock position.	14
3	15
Keyboard	15
Removing the Keyboard	15
1 Follow the instructions in \	15
2 Remove the battery. See \	15
3 Turn the computer over and open the display as far as possible.	15
4 Using a plastic scribe, release the four tabs that secure the keyboard to the palm rest and ease the keyboard up until it clears off the palm rest.	15
5 Without pulling hard on the keyboard, hold it towards the display.	16
6 Lift the connector latch that secures the keyboard cable to the connector on the system board and remove the keyboard cable.	16
7 Lift the keyboard off the computer.	16
Replacing the Keyboard	17
1 Follow the instructions in \	17
2 Slide the keyboard cable into the connector on the system board. Press down on the connector latch to secure the keyboard cable to the connector on the system board.	17
3 Slide the tabs on the keyboard into the slots on the palm rest.	17
4 Gently press around the edges of the keyboard to lock the four tabs securing the keyboard.	17
5 Close the display and turn the computer over.	17
6 Replace the battery. See \	17
4	19
Memory Module(s)	19
Removing the Memory Module(s)	19
1 Follow the instructions in \	19
2 Remove the battery. See \	19
3 Remove the keyboard. See \	19
4 Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the module pops up.	19
5 Remove the memory module from the memory-module connector.	19
Replacing the Memory Module(s)	20
1 Follow the instructions in \	20
2 Align the notch in the memory module with the tab in the memory-module connector.	20
3 Slide the memory module firmly into the slot at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.	20
4 Replace the keyboard. See \	21
5 Replace the battery, see \	21
6 Turn on the computer.	21
5	23
Optical Drive	23
Removing the Optical Drive	23
1 Follow the instructions in \	23
2 Remove the battery. See \	23
3 Remove the keyboard. See \	23
4 Remove the screw that secures the optical drive to the computer base.	23
5 Using a plastic scribe, push the notch on the optical drive to release it from the optical-drive compartment.	23
6 Slide the optical drive out of the optical-drive compartment.	23
Replacing the Optical Drive	24
1 Follow the instructions in \	24
2 Slide the optical drive into the optical-drive compartment until it is fully seated.	24
3 Replace the screw that secures the optical drive to the computer base.	24
4 Replace the keyboard. See \	24
5 Replace the battery. See \	24
6	25
Palm-Rest Assembly	25
Removing the Palm-Rest Assembly	25
1 Follow the instructions in \	25
2 Remove the battery. See \	25
3 Remove the eight screws that secure the palm-rest assembly to the computer base.	25
4 Remove the keyboard. See \	26
5 Remove the three screws on the palm-rest assembly.	26
6 Lift the connector latch that secures the power-button board cable and touch-pad cable to the connectors on the system board and remove the cables.	26
7 Using a plastic scribe, carefully pry out the palm-rest assembly and then ease the palm-rest assembly from the computer base	27
8 Lift the palm-rest assembly off the computer base.	27
9 Remove the power button board. See \	28
Replacing the Palm-Rest Assembly	28
1 Follow the instructions in \	28
2 Replace the power button board. See \	28
3 Align the palm-rest assembly on the computer base and gently snap the palm-rest assembly into place.	28
4 Slide the touch-pad cable and power-button board cable into the connectors on the system board and press down on the connector latches to secure them.	28
5 Replace the three screws on the palm-rest assembly.	28
6 Replace the keyboard. See \	28
7 Replace the eight screws that secure the palm-rest assembly to the computer base.	28
8 Replace the battery. See \	29
7	31
Power Button Board	31
Removing the Power Button Board	31
1 Follow the instructions in \	31
2 Remove the battery. See \	31
3 Follow the instructions from step 3 to step 8 in \	31
4 Turn the palm-rest assembly over.	31
5 Slide and remove the power-button board cable through the slot on the palm-rest assembly.	31
6 Remove the screw that secures the power button board to the palm rest.	31
7 Push and release the tabs that secure the power button board to the palm rest.	31
8 Lift the power button board along with its cable away from the palm rest.	31
Replacing the Power Button Board	32
1 Follow the instructions in \	32
2 Slide the power button board under the tabs on the palm rest and align the screw hole on the power button board with the screw hole on the palm rest.	32
3 Replace the screw that secures the power button board to the palm rest.	32
4 Slide the power-button board cable through the slot on the palm-rest assembly.	32
5 Turn the palm-rest assembly over.	32
6 Follow the instructions from step 3 to step 7 in \	32
7 Replace the battery. See \	32
8	33
Hard Drive	33
Removing the Hard Drive	33
1 Follow the instructions in \	33
2 Remove the battery. See \	33
3 Follow the instructions from step 3 to step 8 in \	33
4 Slide the hard-drive assembly to the left to disconnect it from the connector on the system board.	34
5 Lift the hard-drive assembly out of the computer base.	34
6 Remove the two screws that secure the hard-drive bracket to the hard drive.	34
7 Lift the hard-drive bracket away from the hard drive.	34
Replacing the Hard Drive	35
1 Follow the instructions in \	35
2 Remove the new hard drive from its packaging.	35
3 Place the hard-drive bracket on the hard drive.	35
4 Replace the two screws that secure the hard-drive bracket to the hard drive.	35
5 Place the hard-drive assembly on the computer base.	35
6 Push the hard-drive assembly towards the right to connect it to the connector on the system board.	35
7 Follow the instructions from step 3 to step 7 in \	35
8 Replace the battery. See \	35
9	37
Wireless Mini-Card	37
Removing the Mini-Card	37
1 Follow the instructions in \	37
2 Remove the battery. See \	37
3 Follow the instructions from step 3 to step 8 in \	37
4 Disconnect the antenna cables from the Mini-Card.	37
5 Push and release the tab that secures the Mini-Card to the connector on the system board.	37
6 Lift the Mini-Card out of the connector on the system board.	38
Replacing the Mini-Card	38
1 Follow the instructions in \	38
2 Remove the new Mini-Card from its packaging.	38
3 Insert the Mini-Card connector at a 45-degree angle into the connector on the system-board.	39
4 Press the other end of the Mini-Card down until it clicks into place.	39
5 Connect the appropriate antenna cables to the Mini-Card you are installing. The following table provides the antenna cable color scheme for the Mini-Cards supported by your computer.	39
6 Follow the instructions from step 3 to step 7 in \	39
7 Replace the battery. See \	39
8 Install the drivers and utilities for your computer, as required.	39
10	41
Audio Board	41
Removing the Audio Board	41
1 Follow the instructions in \	41
2 Remove the battery. See \	41
3 Follow the instructions from step 3 to step 8 in \	41
4 Disconnect the Mini-Card antenna cables from the connectors on the Mini-Card. See \	41
5 Lift the connector latch that secures the audio-board cable to the connector on the system board and remove the audio-board cable.	41
6 Push and release the tab that secures the audio board to the computer base.	41
7 Lift the audio board away from the computer base.	41
Replacing the Audio Board	42
1 Follow the instructions in \	42
2 Use the alignment posts on the computer base to place the audio board in place and press the audio board until it clicks into place.	42
3 Slide the audio-board cable into the connector on the system board. Press down on the connector latch to secure the audio-board cable to the connector on the system board.	42
4 Connect the Mini-Card antenna cables to the connectors on the Mini-Card. See \	42
5 Follow the instructions from step 3 to step 7 in \	42
6 Replace the battery. See \	42
11	43
Coin-Cell Battery	43
Removing the Coin-Cell Battery	43
1 Follow the instructions in \	43
2 Remove the battery. See \	43
3 Follow the instructions from step 3 to step 8 in \	43
a Lift the connector latch that secures the audio-board cable to the connector on the system board and remove the audio-board cable.	43
b Disconnect the coin-cell battery cable from the connector on the system board.	43
c Release the coin-cell battery from the battery socket on the computer base.	43
a Using a plastic scribe, gently pry the coin-cell out of the battery socket on the system board.	44
b Lift the coin-cell battery out of the battery socket on the system board.	44
Replacing the Coin-Cell Battery	45
1 Follow the instructions in \	45
a Slide the coin-cell battery into the battery socket on the computer base.	45
b Connect the coin-cell battery cable to the connector on the system board.	45
c Slide the audio-board cable into the connector on the system board. Press down on the connector latch to secure the audio-board cable to the connector on the system board.	45
2 Follow the instructions from step 3 to step 7 in \	45
3 Replace the battery. See \	45
12	47
USB Board	47
Removing the USB Board	47
1 Follow the procedures in \	47
2 Remove the battery. See \	47
3 Follow the instructions from step 3 to step 8 in \	47
4 Remove the optical drive. See \	47
5 Lift the connector latch that secures the USB-board cable to the connector on the system board and remove the USB-board cable.	47
6 Remove the screw that secures the USB board to the computer base.	47
7 Lift the USB board at an angle and release the connectors on the USB board from the slots on the computer base.	47
Replacing the USB Board	48
1 Follow the procedures in \	48
2 Slide the connectors on the USB board into the slots on the computer base and align the screw hole on USB board with the screw hole on the computer base.	48
3 Replace the screw that secures the USB board to the computer base.	48
4 Slide the USB-board cable into the connector on the system board. Press down on the connector latch to secure the USB-board cable to the connector on the system board.	48
5 Replace the optical drive. See \	48
6 Follow the instructions from step 3 to step 7 in \	48
7 Replace the battery. See \	48
13	49
Thermal Cooling Assembly	49
Removing the Thermal Cooling Assembly	49
1 Follow the instructions in \	49
2 Remove the battery. See \	49
3 Follow the instructions from step 3 to step 8 in \	49
4 Disconnect the fan cable from the connector on the system board.	49
5 In sequential order (indicated on the thermal cooling assembly), loosen the four captive screws that secure the thermal cooling assembly to the system board.	49
6 Lift the thermal cooling assembly away from the computer.	49
Replacing the Thermal Cooling Assembly	50
1 Follow the instructions in \	50
2 Align the four captive screws on the thermal cooling assembly with the screw holes on the system board and tighten the screws in sequential order (indicated on the thermal cooling assembly).	50
3 Connect the fan cable to the connector on the system board.	50
4 Follow the instructions from step 3 to step 7 in \	50
5 Replace the battery. See \	50
14	51
Processor Module (For Inspiron 14-N4050 Only)	51
Removing the Processor Module	51
1 Follow the instructions in \	51
2 Remove the battery. See \	51
3 Follow the instructions from step 3 to step 8 in \	51
4 Remove the thermal cooling assembly. See \	51
5 To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to stop.	51
6 Lift the processor module from the ZIF socket.	52
Replacing the Processor Module	52
1 Follow the instructions in \	52
2 Align the pin-1 corner of the processor module with the pin-1 corner of the ZIF socket, then insert the processor module.	53
3 Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the system board.	53
4 Replace the thermal cooling assembly. See \	53
5 Follow the instructions from step 3 to step 7 in \	53
6 Replace the battery. See \	53
15	55
Hinge Cover	55
Removing the Hinge Cover	55
1 Follow the instructions in \	55
2 Remove the battery. See \	55
3 Remove the two screws that secure the hinge cover to the computer base.	55
4 Turn the computer over.	56
5 Pry the hinge cover off the computer base.	56
Replacing the Hinge Cover	57
1 Follow the instructions in \	57
2 Align the tabs on the hinge cover with the slots on the computer base and snap the hinge cover into place.	57
3 Turn the computer over.	57
4 Replace the two screws that secure the hinge cover to the computer base.	57
5 Replace the battery. See \	57
16	59
Display	59
Display Assembly	59
Removing the Display Assembly	59
1 Follow the instructions in \	59
2 Remove the battery. See \	59
3 Follow the instructions from step 3 to step 8 in \	59
4 Remove the optical drive. See \	59
5 Remove the USB board. See \	59
6 Remove the hinge cover. See \	59
7 Disconnect the display cable from the connector on the system board.	59
8 Disconnect the Mini-Card antenna cables from the connectors on the Mini-Card.	59
9 Make a note of the display cable and Mini-Card antenna cables routing and remove the cables from the routing guides.	59
10 Remove the two screws that secure the display assembly to the computer base.	60
11 Lift and remove the display assembly out of the computer base.	60
Replacing the Display Assembly	61
1 Follow the instructions in \	61
2 Place the display assembly in position and replace the two screws that secure the display assembly to the computer base.	61
3 Route the display cable and Mini-Card antenna cables through the routing guides.	61
4 Connect the display cable to the connector on the system board.	61
5 Connect the Mini-Card antenna cables to the Mini-Card.	61
6 Replace the hinge cover. See \	61
7 Replace the USB board. See \	61
8 Replace the optical drive. See \	61
9 Follow the instructions from step 3 to step 7 in \	62
10 Replace the battery. See \	62
Display Bezel	62
Removing the Display Bezel	62
1 Follow the instructions in \	62
2 Remove the display assembly. See \	62
3 Using your fingertips, carefully pry up the inside edge of the display bezel.	62
4 Remove the display bezel.	62
Replacing the Display Bezel	63
1 Follow the instructions in \	63
2 Realign the display bezel over the display panel and gently snap into place.	63
3 Replace the display assembly. See \	63
Removing the Display Panel	63
1 Follow the instructions in \	63
2 Remove the display assembly. See \	63
3 Remove the display bezel. See \	63
4 Disconnect the camera cable from the connector on the camera module. See \	63
5 Make a note of the display cable and Mini-Card antenna cables routing and remove them from the routing guides on the display hinges.	63
6 Remove the six screws that secure the display panel to the display cover.	63
7 Lift the display panel off the display cover.	64
8 Remove the four screws (two on each side) that secure the display-panel brackets to the display panel.	64
9 Turn the display panel over and place it on a clean surface.	65
10 Peel and lift the tape that secures the display cable to the display-board connector and disconnect the display cable.	65
11 Make a note of the display cable routing and peel the cable from the back of the display panel.	65
Replacing the Display Panel	66
1 Follow the instructions in \	66
2 Attach the display cable to the back of the display panel.	66
3 Connect the display cable to the display-board connector and secure it with the tape.	66
4 Turn the display panel over.	66
5 Align the screw holes on the display-panel bracket with the screw holes on the display panel and replace the four screws (two on each side).	66
6 Align the screw holes on the display panel with the screw holes on the display cover and replace the six screws.	66
7 Route the display cable and Mini-Card antenna cables through the routing guides on the display hinges.	66
8 Connect the camera cable to the connector on the camera module. See \	66
9 Replace the display bezel. See \	66
10 Replace the display assembly. See \	66
17	69
Camera Module	69
Removing the Camera Module	69
1 Follow the instructions in \	69
2 Remove the battery. See \	69
3 Follow the instructions from step 3 to step 8 in \	69
4 Remove the optical drive. See \	69
5 Remove the USB board. See \	69
6 Remove the hinge cover. See \	69
7 Remove the display assembly. See \	69
8 Remove the display bezel. See \	69
9 Disconnect the camera cable from the connector on the camera module.	69
10 Release the tabs that secure the camera module to the display cover and lift the camera module off the display cover.	69
Replacing the Camera Module	70
1 Follow the instructions in \	70
2 Connect the camera cable to the connector on the camera module.	70
3 Use the alignment posts on the display cover to place the camera module in position and snap the camera module into place.	70
4 Replace the display bezel. See \	70
5 Replace the display assembly. See \	70
6 Replace the hinge cover. See \	70
7 Replace the USB board. See \	70
8 Replace the optical drive. See \	71
9 Follow the instructions from step 3 to step 7 in \	71
10 Replace the battery. See \	71
18	73
System Board	73
Removing the System Board	73
1 Follow the instructions in \	73
2 Press and eject any installed cards from the 3-in-1 media card reader.	73
3 Remove the battery. See \	73
4 Remove the keyboard. See \	73
5 Remove the memory module(s). See \	73
6 Remove the optical drive. See \	73
7 Follow the instructions from step 3 to step 8 in \	73
8 Remove the Mini-Card. See \	73
9 Follow the instructions from step 4 to step 5 in \	73
10 Remove the thermal cooling assembly. See \	74
11 Remove the processor. See \	74
12 Disconnect the display cable, speakers cable, audio-board cable, USB-board cable, coin-cell battery cable, and AC-adapter cable from the connectors on the system board.	74
13 Remove the two screws that secure the system board to the computer base.	74
14 Lift the system board at an angle and release the connectors on the system board from the slots on the computer base.	74
Replacing the System Board	75
1 Follow the instructions in \	75
2 Slide the connectors on the system board into the slots on the computer base.	75
3 Replace the two screws that secure the system board to the computer base.	75
4 Connect the display cable, speakers cable, audio-board cable, USB-board cable, coin-cell battery cable, and AC-adapter cable to the connectors on the system board.	75
5 Replace the processor. See \	75
6 Replace the thermal cooling assembly. See \	75
7 Follow the instructions from step 5 to step 6 in \	75
8 Replace the Mini-Card. See \	75
9 Follow the instructions from step 3 to step 7 in \	76
10 Replace the optical drive. See \	76
11 Replace the memory module(s). See \	76
12 Replace the keyboard. See \	76
13 Replace the battery. See \	76
14 Replace any removed cards or blanks in the 3-in-1 media card reader.	76
15 Turn on the computer.	76
16 Enter the service tag. See \	76
Entering the Service Tag in the BIOS	76
1 Ensure that the AC adapter is plugged in and that the main battery is installed properly.	76
2 Turn on the computer.	76
3 Press <F2> during POST to enter the system setup program.	76
4 Navigate to the security tab and enter the service tag in the Set Service Tag field.	76
19	77
Flashing the BIOS	77
1 Turn on the computer.	77
2 Go to support.dell.com/support/downloads.	77
3 Locate the BIOS update file for your computer:	77
a Click Enter a Tag.	77
b Enter your computer’s Service Tag in the Enter a service tag: field, click Go, and proceed to step 4.	77
a Click Select Model.	77
b Select the type of product in the Select Your Product Family list.	77
c Select the product brand in the Select Your Product Line list.	77
d Select the product model number in the Select Your Product Model list.	77
e Click Confirm.	77
4 A list of results appear on the screen. Click BIOS.	77
5 Click Download Now to download the latest BIOS file. The File Download window appears.	77
6 Click Save to save the file on your desktop. The file downloads to your desktop.	77
7 Click Close if the Download Complete window appears. The file icon appears on your desktop and the name of the file is the same as the file that you downloaded.	77

Match case Limit results 1 per page

Dell Inspiron M4040/14-N4050

Owner’s Manual

Regulatory model: P22G

Regulatory type: P22G001; P22G002