Dell Inspiron 16 7610 Service Manual for computers with three fans
Dell Inspiron 16 7610 Manual
View all Dell Inspiron 16 7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell Inspiron 16 7610 manual content summary:
- Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 1
Inspiron 16 7610 Service Manual for computers with three fans Regulatory Model: P107F Regulatory Type: P107F001 July 2021 Rev. A01 - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 2
of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 3
Chapter 1: Identifying the correct manual for your Inspiron 16 7610 6 Chapter 2: Working inside your computer 7 Before working inside your computer...7 Entering Service Mode...7 Safety instructions...7 Electrostatic discharge-ESD protection...8 ESD field service kit ...9 Transporting sensitive - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 4
Removing the I/O board...35 Installing the I/O board...36 Fans...37 Removing the left fan...37 Installing the left fan...38 Removing the right fan...38 Installing the right fan...39 Heat sink...40 Removing the heat sink...40 Installing the heat sink...41 Power-adapter port...42 Removing the power- - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 5
settings...74 Clearing BIOS (System Setup) and System passwords 74 Chapter 6: Troubleshooting...75 Handling swollen Lithium-ion batteries...75 Locate the Service Tag or Express Service Code of your Dell computer 75 System-diagnostic lights...76 SupportAssist | On-board Diagnostics...77 Recovering - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 6
ordered. This topic is to help you determine if you are referring to the correct manual when attempting to remove or install components on your computer. This manual is only applicable for Inspiron 16 7610 computers with three fans installed. This three fan configuration is only available in systems - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 7
and press the power button for 3 seconds or until the Dell logo appears on the screen. 3. Press any key to continue any key to continue the Service Mode procedure. NOTE: The Service Mode procedure automatically skips the following the system board. Safety instructions Use the following safety - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 8
troubleshooting and repairs as authorized or directed by the Dell technical assistance team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the safety instructions may not be obvious, such as intermittent problems or a shortened product life span. As the - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 9
for safe transport. ESD protection summary It is recommended that all field service technicians use the traditional wired ESD grounding wrist strap and protective anti-static mat at all times when servicing Dell products. In addition, it is critical that technicians keep sensitive parts separate - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 10
or parts to be returned to Dell, it is critical to place and point your toes out. 2. Tighten stomach muscles. Abdominal muscles support your spine when you lift, offsetting the force of the load. reverse to set the load down. Exiting Service Mode Service Mode allows users to immediately cut off - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 11
3 Removing and installing components NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Recommended tools The procedures in this document may require the following tools: ● Phillips screwdriver #0/#1 ● Plastic scribe Screw list NOTE: - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 12
keyboard M2x3 2 assembly System board Palm-rest and keyboard M2x2 1 assembly System board Palm-rest and keyboard M2x3 2 assembly Major components of Inspiron 16 7610 The following image shows the major components of Inspiron 16 7610. Screw image 12 Removing and installing components - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 13
wireless-card bracket 11. I/O board 12. Memory 13. Left fan 14. Heat sink 15. Power-button with optional fingerprint-reader 16. Power-button board NOTE: Dell provides a list of components and their part numbers for the original system configuration purchased. These parts are available according to - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 14
Base cover Removing the base cover Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. About this task NOTE: Before removing the base cover, ensure that there is no micro-SD card installed in the micro-SD card slot - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 15
Steps 1. Remove the seven screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly. 2. Loosen the two captive screws (M2x8.5) that secure the base cover to the palm-rest and keyboard assembly. 3. Using a plastic scribe, pry the base cover from the top left at the hinge and - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 16
Steps 1. Place and snap the base cover into place on the palm-rest and keyboard assembly. 16 Removing and installing components - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 17
assembly. 3. Replace the seven screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly. Next steps 1. Exit Service Mode. 2. Follow the procedure in After working inside your computer. Memory module Removing the memory Prerequisites 1. Follow the procedure in Before working - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 18
Steps 1. Lift the Mylar to access the memory module. 2. Using your fingertips, carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops-up. 3. Remove the memory module from the memory-module slot on the system board. NOTE: Your computer may have up - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 19
the memory module in place. NOTE: Repeat steps 1 to 4 for each memory module being installed into your computer. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Removing and installing components 19 - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 20
1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. About this task NOTE: This M.2 card installed on M.2 slot one will depend on the configuration ordered. Supported card configurations on the M.2 card slot: ● M.2 2230 solid-state drive - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 21
bracket ● M.2 2280 solid-state drive NOTE: If you are replacing a M.2 2280 solid-state drive with a M.2 2230 solid-state drive, contact Dell Support to purchase the M.2 2230 mounting bracket. The following image(s) indicate the location of the M.2 2230 solid-state drive and provides a visual - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 22
Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. About this task NOTE: This The M.2 card installed on M.2 slot one will depend on the configuration ordered. Supported card configurations on the M.2 card slot: ● M.2 2230 solid-state drive + - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 23
solid-state drive, you may order a copper thermal shield from Dell support for better thermal performance. The following image(s) indicate the location of the system board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Solid - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 24
2. Enter Service Mode. 3. Remove the base cover. About this task NOTE: This procedure applies only component before performing the installation process. About this task NOTE: M.2 card slot two can only support an M.2 2230 solid-state drive. The following image(s) indicate the location of the M.2 2230 - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 25
Replace the screw (M2x3) that secures the M.2 2230 thermal shield to the system board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Wireless card Removing the wireless card Prerequisites 1. Follow the procedure in Before - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 26
Steps 1. Remove the screw (M2x3) that secures the wireless-card bracket to the wireless card and system board. 2. Lift the wireless-card bracket off the wireless card. 3. Disconnect the antenna cables from the wireless card. 4. Slide and remove the wireless card from the M.2 card slot on the system - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 27
board. 5. Replace the screw (M2x3) that secures the wireless card and wireless-card bracket to the system board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Removing and installing components 27 - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 28
to pry on or against the battery. ● Ensure any screws during the servicing of this product are not lost or misplaced, to prevent accidental puncture or Dell technical support for assistance. See www.dell.com/contactdell. ● Always purchase genuine batteries from www.dell.com or authorized Dell - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 29
Steps 1. Peel the tape that secures the battery cable to the battery. 2. Disconnect the battery cable from the system board. 3. Remove the five screws (M2x3) that secure the battery to the palm-rest and keyboard assembly. 4. Lift the battery off the palm-rest and keyboard assembly. Installing the - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 30
Steps 1. Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly. 2. Replace the five screws (M2x3) that secure the battery to the palm-rest and keyboard assembly. NOTE: As this battery is leveraged for use across multiple products, the printed screw - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 31
Steps 1. Turn the battery over. 2. Peel the battery cable off the battery. 3. Disconnect the battery cable from the battery. 4. Lift the battery cable off the battery. Installing the battery cable Prerequisites If you are replacing a component, remove the existing component before performing the - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 32
inside your computer. Display assembly Removing the display assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. About this task The following image(s) indicate the location of the display assembly and provides - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 33
Steps 1. Using the pull tab, disconnect the display-cable from the connector on the system board. 2. Remove the three screws (M2.5x5) that secure the right-display hinge to the system board. 3. Pry open the right-display hinge at an angle of 90 degrees. 4. Remove the three screws (M2.5x5) that - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 34
Installing the display assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) indicate the location of the display assembly and provides a visual representation of the installation - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 35
-rest and keyboard assembly. 7. Connect the display cable to the connector on the system board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. I/O board Removing the I/O board Prerequisites 1. Follow the procedure in Before - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 36
Steps 1. Lift the I/O-board cable-connector latch and disconnect the I/O-board cable from the I/O board. 2. Lift the power-button with fingerprint-reader cable-connector latch and disconnect the power-button with fingerprint- reader cable from the I/O board. NOTE: This step is only applicable for - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 37
with the optional fingerprint reader. 8. Connect the coin-cell battery cable to the I/O board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Fans Removing the left fan Prerequisites 1. Follow the procedure in Before working - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 38
the Mylar that covers the system board. 5. Connect the fan cable to the system board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Removing the right fan Prerequisites 1. Follow the procedure in Before working inside your - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 39
About this task The following image(s) indicate the location of the right fan and provides a visual representation of the removal procedure. Steps 1. Disconnect the right-fan cable from the system board. 2. Remove the two screws (M2x5) that secure the right fan to the palm-rest and keyboard - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 40
the palm-rest and keyboard assembly. 4. Connect the right-fan cable to the system board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Heat sink Removing the heat sink Prerequisites 1. Follow the procedure in Before working - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 41
Steps 1. In reverse sequential order (7>6>5>4>3>2>1) loosen the seven captive screws that secure the heat sink to the system board. 2. Lift the heat sink from the system board. Installing the heat sink Prerequisites If you are replacing a component, remove the existing component before performing - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 42
captive screws that secure the heat sink to the system board. Next steps 1. Install the left fan. 2. Install the base cover. 3. Exit Service Mode. 4. Follow the procedure in After working inside your computer. Power-adapter port Removing the power-adapter port Prerequisites 1. Follow the procedure - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 43
tapes that secure the power-adapter port cable to the palm-rest and keyboard assembly. 6. Remove the power-adapter port cable from the routing guides on the palm-rest and keyboard assembly. 7. Remove the power-adapter port from the palm-rest and keyboard assembly. Installing the power-adapter port - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 44
the system board. 3. Route the power-adapter port cable through the routing guides on the palm-rest and keyboard assembly. 4. Place the power-adapter port 2. Install the left fan. 3. Install the base cover. 4. Exit Service Mode. 5. Follow the procedure in After working inside your computer. Power- - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 45
3. Remove the base cover. 4. Remove the heat sink. 5. Remove the left fan. About this task The following image(s) indicate the location of the power-button board and provides a visual representation of the removal procedure. Steps 1. Remove the three screws (M2.5x5) that secure the left-display - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 46
left-display hinge to the palm-rest and keyboard assembly. Next steps 1. Install the heat sink. 2. Install the left fan. 3. Install the base cover. 4. Exit Service Mode. 5. Follow the procedure in After working inside your computer. 46 Removing and installing components - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 47
palm-rest and keyboard assembly. Next steps 1. Install the power-button board. 2. Install the heat sink. 3. Install the left fan. 4. Install the base cover. 5. Exit Service Mode. 6. Follow the procedure in After working inside your computer. Removing and installing components 47 - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 48
Removing the power-button Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. 4. Remove the heat sink. 5. Remove the left fan. 6. Remove the power-button board. About this task The following image(s) indicate - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 49
with fingerprint reader Removing the power-button with fingerprint reader Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. 4. Remove the heat sink. 5. Remove the left fan. 6. Remove the power-button board. About this task - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 50
palm-rest and keyboard assembly. Next steps 1. Install the power-button board. 2. Install the heat sink. 3. Install the left fan. 4. Install the base cover. 5. Exit Service Mode. 6. Follow the procedure in After working inside your computer. 50 Removing and installing components - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 51
System board Removing the system board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the memory. 4. Remove the M.2 2230 solid-state drive or M.2 2280 solid-state drive from M.2 slot one, whichever applicable 5. Remove the M.2 2230 - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 52
Steps 1. Using the pull tab, disconnect the display-cable from the connector on the system board. 2. Peel the tape that covers the power-adapter port cable-connector on the system board. 3. Disconnect the power-adapter port cable from the system board. 4. Remove the two screws (M2x5) that secure the - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 53
1. Display cable 2. Power-adapter port cable 3. Keyboard-backlight cable 4. Keyboard cable 5. Touchpad cable 6. Speaker cable 7. I/O-board cable The following image(s) indicate the location of the system board and provides a visual representation of the installation procedure. Removing and - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 54
Steps 1. Place the system board on the palm-rest and keyboard assembly. 2. Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly. 3. Replace the two screws (M2x3) that secure the system board to the palm-rest and keyboard assembly. 4. Replace the screw - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 55
10. Follow the procedure in After working inside your computer. Touchpad Removing the touchpad Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the M.2 2230 solid-state drive or M.2 2280 solid-state drive from M.2 slot one, whichever - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 56
Installing the touchpad Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) indicate the location of the touchpad and provides a visual representation of the installation procedure. Steps 1. - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 57
NOTE: When adhering the tapes, ensure that it is adhered to its original position so that it runs across touchpad and palmrest and keyboard assembly. 11. Connect the touchpad cable to the touchpad and close the latch. Next steps 1. Install the system board. 2. Install the heat sink. 3. Install the - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 58
Steps 1. Peel off the tapes that secure the speaker cable to the palm-rest and keyboard assembly. 2. Remove the speaker cables from the routing guides on the palm-rest and keyboard assembly. 3. Lift the speakers along with their cables off the palm-rest and keyboard assembly. Installing the speakers - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 59
assembly. NOTE: Ensure that the alignment posts are threaded through the rubber grommets on the speaker. 2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly. 3. Adhere the tapes that secure the speaker cable to the palm-rest and keyboard assembly. Next steps - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 60
8. Remove the display assembly. 9. Remove the power-button board. 10. Remove the power button or power button with fingerprint, whichever applicable. 11. Remove the left fan. 12. Remove the right fan. 13. Remove the system board. NOTE: The system board can be removed with the heat sink and memory - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 61
Steps Place the palm-rest and keyboard assembly on a flat and clean surface and perform the post-requisites to install the palm-rest and keyboard assembly. Next steps 1. Install the speakers. 2. Install the system board. 3. Install the left fan. 4. Install the right fan. 5. Install the power button - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 62
4 Drivers and downloads When troubleshooting, downloading or installing drivers it is recommended that you read the Dell Knowledge Based article, Drivers and Downloads FAQ SLN128938. 62 Drivers and downloads - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 63
5 System setup CAUTION: Unless you are an expert computer user, do not change the settings in the BIOS Setup program. Certain changes can make your computer work incorrectly. NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not be displayed. - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 64
optical drive or hard drive). During the Power-on Self Test (POST), when the Dell logo appears, you can: ● Access System Setup by pressing F2 key ● Bring up Overview BIOS Version Displays the BIOS version number. Service Tag Displays the Service Tag of the computer. Asset Tag Displays the - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 65
Table 4. System setup options-System information menu (continued) Overview Processor ID Displays the processor identification code. Processor L2 Cache Displays the processor L2 Cache size. Processor L3 Cache Displays the processor L3 Cache size. Microcode Version Displays the microcode - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 66
booting from USB mass storage devices such as external hard drive, optical drive, and USB drive. By default, Enable USB Boot Support is selected. Table 7. System setup options-Storage menu Storage SATA/NVMe Operation SATA/NVMe Operation Configures operating mode of the integrated storage - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 67
to boot within the number of failures equal or greater than the value specified by Dell Auto OS Recovery Threshold, and local Service does not boot, or is not installed. Default: ON Dell Auto OS Recovery Threshold Controls the automatic boot flow for SupportAssist System Resolution Console and - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 68
after the BIOS update is completed. Steps 1. Restart the computer. 2. Go to www.dell.com/support. ● Enter the Service Tag or Express Service Code and click Search. ● Click Drivers & Downloads. ● Click Detect Drivers and follow the on-screen instructions. 3. If you are unable to detect or find the - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 69
only THIS PC XXXXXXX. NOTE: XXXXXXX denotes the Service Tag. 9. Select the latest BIOS file and click file. NOTE: Follow the on-screen instructions. Updating BIOS on systems with BitLocker enabled see Knowledge Article: https:// www.dell.com/support/article/sln153694 Updating your system BIOS using - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 70
will need: ● USB key formatted to the FAT32 file system (key does not have to be bootable) ● BIOS executable file that you downloaded from the Dell Support website and copied to the root of the USB key ● AC power adapter connected to the system ● Functional system battery to flash the BIOS Perform - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 71
3. The flash BIOS menu will open, and then click the Flash from file. 4. Select external USB device. System setup 71 - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 72
5. Once the file is selected, Double click the flash target file, then press submit. 6. Click the Update BIOS then system will reboot to flash the BIOS. 72 System setup - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 73
7. Once complete, the system will reboot and the BIOS update process is completed. System and setup password Table 14. System and setup password Password type System password Setup password Description Password that you must enter to log on to your system. Password that you must enter to access - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 74
on your computer. Steps 1. Enter Service Mode. 2. Wait for one minute. 3. Exit Service Mode. Clearing BIOS (System Setup) and System passwords About this task To clear the system or BIOS passwords, contact Dell technical support as described at www.dell.com/contactdell. NOTE: For information on - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 75
Service Code. To view relevant support resources for your Dell computer, we recommend entering the Service Tag or Express Service Code at www.dell.com/support. For more information on how to find the Service Tag for your computer, see Locate the Service Tag for your Dell Laptop. Troubleshooting - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 76
codes and recommended solutions are intended for Dell service technicians to troubleshoot problems. You should only perform troubleshooting and repairs as authorized or directed by the Dell technical support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 77
indicate if problems were troubleshoot and fix your computer when it fails to boot into their primary operating system due to software or hardware failures. For more information about the Dell SupportAssist OS Recovery, see Dell SupportAssist OS Recovery User's Guide at www.dell.com/support - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 78
Enter. The BIOS Update Utility appears. 8. Follow the on-screen instructions to complete the BIOS update. Updating the BIOS in Windows Steps 1. Go to www.dell.com/support. 2. Click Product support. In the Search support box, enter the Service Tag of your computer, and then click Search. NOTE: If - Dell Inspiron 16 7610 | Service Manual for computers with three fans - Page 79
and services www.dell.com My Dell Tips Contact Support Online help for operating system In Windows search, type Contact Support, and press Enter. www.dell.com/support/windows www.dell.com/support/linux Troubleshooting information, user manuals, setup instructions, www.dell.com/support product
Inspiron 16 7610
Service Manual for computers with three fans
Regulatory Model: P107F
Regulatory Type: P107F001
July 2021
Rev. A01