Dell Inspiron 16 7630 2-in-1 Service Manual

Dell Inspiron 16 7630 2-in-1 Manual

Get Dell Inspiron 16 7630 2-in-1 PDF manuals and user guides View all Dell Inspiron 16 7630 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Dell Inspiron 16 7630 2-in-1 manual content summary:

  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 1
    Inspiron 16 7630 2-in-1 Service Manual Regulatory Model: P128F Regulatory Type: P128F001 December 2022 Rev. A00
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 2
    use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2022 Dell Inc. or its subsidiaries. All rights reserved. Dell
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 3
    Contents Chapter 1: Working inside your computer 6 Before working inside your computer...6 Safety instructions...6 Electrostatic discharge-ESD protection...7 ESD field service kit ...8 Transporting sensitive components...9 After working inside your computer...9 BitLocker...9 After working inside
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 4
    Windows 68 Updating the BIOS in Linux and Ubuntu...68 Updating the BIOS from the F12 One-Time boot menu 69 Chapter 5: Troubleshooting...70 Handling swollen Lithium-ion batteries...70 Locate the Service Tag or Express Service Code of your Dell computer 70 System diagnostic lights...71 4 Contents
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 5
    SupportAssist diagnostics...72 Built-in self-test (BIST)...72 M-BIST...72 LCD Built-in Self Test (BIST)...72 Recovering the operating system...73 WiFi power cycle...73 Drain residual flea power (perform hard reset)...74 Real Time Clock-RTC reset...74 Chapter 6: Getting help and contacting Dell 75
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 6
    , see the documentation of your operating system for shut-down instructions. 3. Disconnect your computer and all attached devices from their electrical to turn on the computer to put it into Service Mode or the computer does not support Service Mode then proceed to disconnect the battery cable. To
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 7
    troubleshooting and repairs as authorized or directed by the Dell technical assistance team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the safety instructions may not be obvious, such as intermittent problems or a shortened product life span. As the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 8
    physical connection of the wrist strap and bonding wire between your skin, the ESD mat, and the hardware is known as bonding. Use only Field Service kits with a wrist strap, mat, and bonding wire. Never use wireless wrist straps. Always be aware that the internal wires of a wrist strap are prone
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 9
    .com/ devices/recoverykey For more information, refer to Windows Support article: Finding your BitLocker recovery key in Windows After working your computer and all attached devices to their electrical outlets. NOTE: To exit service mode, ensure to connect the AC adapter to the power-adapter port on
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 10
    2 Removing and installing components NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Recommended tools The procedures in this document may require the following tools: ● Phillips screwdriver #0 ● Phillips screwdriver #2 Screw list
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 11
    Table 1. Screw list (continued) Component Screw type Display hinges M2.5x5 Display hinges M2x4 Display board Heat sink without discrete graphics M2x1.8 Captive screw Heat sink with discrete graphics Captive screw Power-button board Speaker board System board USB Type-C bracket M2x3 M2x1
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 12
    1. Base cover 2. Speaker I/O cable 3. Display I/O cable 4. Heat sink 5. Display-board bracket 6. System board 7. M.2 2230 solid-state drive 8. Wireless-card bracket 9. Wireless card 10. Palm-rest and keyboard assembly 11. Display assembly 12. USB Type-C bracket 13. Battery 12 Removing and
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 13
    14. Speaker board 15. I/O board 16. Coin-cell battery 17. Speakers 18. Power-button board 19. Fan 20. Power button with fingerprint reader NOTE: Dell provides a list of components and their part numbers for the original system configuration purchased. These parts are available according to warranty
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 14
    14 Removing and installing components
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 15
    Steps 1. Remove the six screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly. 2. Loosen the three captive screws that secure the base cover to the palm-rest and keyboard assembly. NOTE: Upon loosening the captive screws, the base cover will open up creating a gap between
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 16
    16 Removing and installing components
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 17
    kind to pry on or against the battery. ● Ensure any screws during the servicing of this product are not lost or misplaced, to prevent accidental puncture or damage can be dangerous. In such an instance, contact Dell technical support for assistance. See www.dell.com/contactdell. ● Always purchase
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 18
    Steps 1. Disconnect the battery cable from the system board. 2. Remove the four screws (M2x3.5) that secure the battery to the palm-rest and keyboard assembly. 3. Lift the battery off the palm-rest and keyboard assembly. Installing the 4-cell battery (64 Wh) Prerequisites If you are replacing a
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 19
    Steps 1. Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly. 2. Replace the four screws (M2x3.5) that secure the battery to the palm-rest and keyboard assembly. 3. Connect the battery cable to the system board. Next steps 1. Install the base cover. 2.
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 20
    Steps 1. Disconnect the battery cable from the system board. 2. Remove the six screws (M2x3.5) that secure the battery to the palm-rest and keyboard assembly. 3. Lift the battery off the palm-rest and keyboard assembly. Installing the 6-cell battery (86 Wh) Prerequisites If you are replacing a
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 21
    only to computers shipped with an M.2 2230 solid-state drive installed. NOTE: The M.2 card installed will depend on the configuration ordered. Supported card configurations on the M.2 card slot: ● M.2 2230 solid-state drive + M.2 2230 mounting bracket ● M.2 2280 solid-state drive The following image
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 22
    the existing component before performing the installation process. About this task NOTE: This procedure applies if you are installing a M.2 2230 solid-state drive. NOTE: Supported card configurations: ● M.2 2230 solid-state drive + M.2 2230 mounting bracket 22 Removing and installing components
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 23
    ● M.2 2280 solid-state drive The following image(s) indicate the location of the M.2 2230 solid-state drive and provides a visual representation of the installation procedure. Steps 1. Place and align the M.2 2230 solid-state drive on the M.2 2230 solid-state drive mounting bracket. 2. Replace the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 24
    shipped with an M.2 2280 solid-state drive installed. NOTE: The M.2 card installed on your computer will depend on the configuration ordered. Supported card configurations on the M.2 card slot: ● M.2 2230 solid-state drive + M.2 2230 mounting bracket ● M.2 2280 solid-state drive The following image
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 25
    ● M.2 2230 solid-state drive + M.2 2230 mounting bracket ● M.2 2280 solid-state drive The following image(s) indicate the location of the M.2 2280 solid-state drive and provides a visual representation of the installation procedure. Steps 1. Align the notch on the M.2 2280 solid-state drive with
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 26
    Steps 1. Disconnect the fan cable from the system board. 2. Remove the three screws (M2x3) that secure the fan to the palm-rest and keyboard assembly. 3. Lift the fan off the palm-rest and keyboard assembly. Installing the fan Prerequisites If you are replacing a component, remove the existing
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 27
    Steps 1. Place the fan on the palm-rest and keyboard assembly. 2. Align the screw holes on the fan with the screw holes on the palm-rest and keyboard assembly. 3. Replace the three screws (M2x3) that secure the fan to the palm-rest and keyboard assembly. 4. Connect the fan cable to the system board.
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 28
    Steps 1. Remove the screw (M2x3) that secures the wireless-card bracket and the wireless card to the system board. 2. Lift the wireless-card bracket off the wireless card. 3. Disconnect the antenna cables from the wireless card. 4. Slide and lift the wireless card off the system board. Installing
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 29
    the antenna cables to the wireless card. The following table provides the antenna-cable color scheme for the wireless card that is supported by your computer: Table 2. Antenna-cable color scheme Connectors on the wireless card Antenna-cable color Main White Auxiliary Black Silkscreen marking
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 30
    Coin-cell battery Removing the coin-cell battery Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: Before removing the base cover, ensure that there is no SD card installed in the SD-card slot on your computer. The following
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 31
    Steps 1. Connect the coin-cell battery cable to the I/O board. 2. Adhere the coin-cell battery to the palm-rest and keyboard assembly. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. I/O board Removing the I/O board Prerequisites 1. Follow the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 32
    Steps 1. Remove the two screws (M2.5x5) and the screw (M2x4) that secure the left display hinge to the palm-rest and keyboard assembly. 2. Pry open the left display hinge to an angle of 90 degrees. 3. Peel the tape that secures the I/O-board connector latch to the I/O board. 4. Lift the I/O-board
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 33
    Steps 1. Place the I/O board on the palm-rest and keyboard assembly. 2. Align the screw holes on the I/O board with the screw holes on the palm-rest and keyboard assembly. 3. Replace the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly. 4. Connect the I/O-board
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 34
    About this task The following images indicate the location of the display assembly and provides a visual representation of the removal procedure. 34 Removing and installing components
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 35
    connector on the system board. 6. Disconnect the display-speaker cable from the speaker board and remove the display-speaker cable from the cable-routing guides. 7. Open the display and place the computer on a clean and flat surface. 8. Remove the two screws (M2.5x5) and the screw (M2x4) that secure
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 36
    Installing the display assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following images indicate the location of the display assembly and provides a visual representation of the installation
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 37
    keyboard assembly. 7. Close the display lid and place the computer on a clean and flat surface. 8. Route the display-speaker cable through the routing guides on the palm-rest and keyboard assembly. 9. Connect the display-speaker cable to the speaker board. 10. Connect the display-board cable to the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 38
    14. Connect the display cable to the connector on the system board and close the latch. 15. Adhere the tape that secures the display-cable connector latch to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Heat sink Removing the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 39
    Installing the heat sink (UMA) Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task NOTE: This procedure applies only to computers shipped with an UMA graphics processor. The following image(s) indicate the location
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 40
    NOTE: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it. NOTE: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can reduce the heat transfer capability of the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 41
    Steps 1. Place the heat-sink on the system board. 2. Align the screw holes on the heat sink with the screw holes on the system board. 3. In sequential order (1 > 2 > 3 > 4 > 5 > 6 > 7) tighten the seven captive screws that secure the heat sink to the system board. Next steps 1. Install the base
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 42
    Steps 1. Remove the two screws (M2.5x5) and the screw (M2x4) that secure the left display hinge to the palm-rest and keyboard assembly. 2. Lift the palm-rest and keyboard assembly to lift the left display hinge from the palm-rest and keyboard assembly. 3. Lift the latch and disconnect the power-
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 43
    The following image(s) indicate the location of the power button and provides a visual representation of the installation procedure. Steps 1. Insert the power button into the slot on the palm-rest and keyboard assembly. 2. Align the screw holes on the power-button board with the screw holes on the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 44
    Power button with fingerprint reader Removing the power button with fingerprint reader Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: This procedure applies only to computers shipped with a power button with fingerprint
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 45
    3. Lift the latch and disconnect the power-button board cable from the I/O board. 4. Lift the latch and disconnect the fingerprint-reader cable from the power-button board. 5. Remove the two screws (M2x3) that secure the power-button board to the palm-rest and keyboard assembly. 6. Lift the power-
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 46
    2. Align the screw holes on the power-button board with the screw holes on the palm-rest and keyboard assembly. 3. Replace the two screws (M2x3) that secure the power-button board to the palm-rest and keyboard assembly. 4. Connect the power-button board cable to the I/O board and close the latch. 5.
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 47
    Installing the speaker board Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) indicate the location of the speaker board and provides a visual representation of the installation procedure.
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 48
    from the speaker board. 2. Using the pull tab, disconnect the speaker-board cable from the system board. 3. Remove the speaker-board cable from the routing guides on the palm-rest and keyboard assembly. 4. Lift the latch and disconnect the touchpad cable from the system board. 5. Lift the latch and
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 49
    1. Using the alignment posts, place the left and right speakers on the palm-rest and keyboard assembly. 2. Route the speaker cables through the routing guides on the palm-rest and keyboard assembly. 3. Connect the speaker cables to the connector on the system board. 4. Route the speaker-board cable
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 50
    System board Removing the system board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 4-cell battery (64 Wh) or the 6-cell battery (86 Wh), whichever is applicable. 4. Remove the M.2 2230 solid-state drive or the M.2 2280 solid-
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 51
    Steps 1. Disconnect the fan cable from the system board. 2. Peel the tape that secures the I/O-board connector latch to the system board. 3. Lift the latch and disconnect the I/O-board cable from the system board. 4. Disconnect the speaker cables from the connector on the system board. 5. Using the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 52
    8. Lift the latch and disconnect the keyboard-backlight cable from the system board. 9. Remove the two screws (M2x4) that secure the USB Type-C bracket to the system board. 10. Lift the USB Type-C bracket off the system board. 11. Remove the two screws (M2x2) that secure the system board to the palm
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 53
    Steps 1. Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly. 2. Replace the two screws (M2x2) that secure the system board to the palm-rest and keyboard assembly. 3. Place the USB Type-C bracket on the system board. 4. Align the screw holes on the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 54
    8. Connect the touchpad cable to the system board and close the latch. 9. Connect the speaker-board cable to the connector on the system board. 10. Connect the speaker cables to the connector on the system board. 11. Connect the I/O board cable to the connector on the system board and close the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 55
    Steps 1. Lift the latch and disconnect the touchpad cable from the system board. 2. Lift the latch and disconnect the touchpad cable from the touchpad. 3. Remove the five screws (M2x1.8) and the three screws (M1.6x2.5) that secure the touchpad to the palm-rest and keyboard assembly. 4. Lift the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 56
    Steps 1. Place the touchpad into its slot on the palm-rest and keyboard assembly. 2. Align the screw holes on the touchpad with the screw holes on the palm-rest and keyboard assembly. 3. Replace the five screws (M2x1.8) and the three screws (M1.6x2.5) that secure the touchpad to the palm-rest and
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 57
    Palm-rest and keyboard assembly Removing the palm-rest and keyboard assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 4-cell battery (64 Wh) or the 6-cell battery (86 Wh), whichever is applicable. 4. Remove the M.2 2230
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 58
    Installing the palm-rest and keyboard assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task NOTE: The replacement palm-rest and keyboard assembly comes pre-assembled with the following components. ● Keyboard
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 59
    9. Install the fan. 10. Install the wireless card. 11. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive, whichever is applicable. 12. Install the 4-cell battery (64 Wh) or the 6-cell battery (86 Wh), whichever is applicable. 13. Install the base cover. 14. Follow the procedure in
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 60
    3 Drivers and downloads When troubleshooting, downloading or installing drivers it is recommended that you read the Dell Knowledge Based article, Drivers and Downloads FAQ 000123347. 60 Drivers and downloads
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 61
    4 System setup CAUTION: Unless you are an expert computer user, do not change the settings in the BIOS Setup program. Certain changes can make your computer work incorrectly. NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not be displayed.
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 62
    . Table 4. System setup options-System information menu Overview Inspiron 16 7630 2-in-1 BIOS Version Displays the BIOS version number. Service Tag Displays the Service Tag of the system. Asset Tag Displays the Asset Tag of the system. Manufacture Date Displays the manufacture date of the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 63
    Table 4. System setup options-System information menu (continued) Overview AC Adapter Displays whether the AC adapter is connected or not. Processor Processor Type Displays the processor type. Maximum Clock Speed Displays the maximum processor clock speed. Minimum Clock Speed Displays the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 64
    Table 5. System setup options-Boot Configuration menu (continued) Boot Configuration By default, the option is enabled. Secure Boot Mode Enable or disable to change the secure boot mode options. By default, the Deployed Mode is enabled. Table 6. System setup options-Integrated Devices menu
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 65
    for SupportAssist OS Recovery tool in the event of certain system errors. By default, the option is enabled. BIOSConnect Enable or disable cloud Service operating system recovery if the main operating system fails to boot with the number of failures equal to or greater than the value specified by
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 66
    Table 14. System setup options-Pre-boot Behavior menu (continued) Pre-boot Behavior Enable Adapter Warnings Enable or disable the warning messages during boot when the adapters with less power capacity are detected. By default, the option is enabled. Warning and Errors Enable or disable the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 67
    About this task To enter the system setup, press F12 immediately after a power-on or reboot. Steps 1. In the System BIOS or System Setup screen, select Security and press Enter. The Security screen is displayed. 2. Select System/Admin Password and create a password in the Enter the new password
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 68
    support. In the Search support box, enter the Service Tag of your computer, and then click Search. NOTE: If you do not have the Service Tag, use the SupportAssist feature to automatically identify your computer. You can also use the product ID or manually the on-screen instructions to complete the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 69
    option for your computer. If the option is listed, then the BIOS supports this BIOS update option. NOTE: Only computers with BIOS Flash Update option to be bootable) ● BIOS executable file that you downloaded from the Dell Support website and copied to the root of the USB drive ● AC power adapter
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 70
    Service Code. To view relevant support resources for your Dell computer, we recommend entering the Service Tag or Express Service Code at www.dell.com/support. For more information on how to find the Service Tag for your computer, see Locate the Service Tag for your Dell Laptop. 70 Troubleshooting
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 71
    patterns and associated problems. Table 17. LED codes Diagnostic light codes (Amber, white) 1,1 1,2 2,1 2,2 2,3 2,4 2,5 2,6 2,7 2,8 3,1 3,2 3,3 3,4 3,5 3,6 3,7 4,1 Problem description TPM enabled or disabled. ● Solid white - Caps Lock enabled. ● Off - Caps Lock disabled. Troubleshooting 71
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 72
    indicate if problems were encountered during NOTE: M-BIST can be manually initiated before POST (Power On the system board b. AMBER: Indicates a problem with the system board 3. If there error codes Blinking Pattern Possible Problem Amber White 2 1 CPU problem with the LCD (screen) of the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 73
    its factory state. You can also download it from the Dell Support website to troubleshoot and fix your computer when it fails to boot into their The following procedure provides the instructions on how to conduct a WiFi power cycle: NOTE: Some ISPs (Internet Service Providers) provide a modem/router
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 74
    power, also known as a performing a "hard reset", is also a common troubleshooting step if your computer does not power on or boot into the operating system at www.dell.com/ support. Real Time Clock-RTC reset The Real Time Clock (RTC) reset function allows you or the service technician to recover the
  • Dell Inspiron 16 7630 2-in-1 | Service Manual - Page 75
    about your computer through videos, manuals and documents. Your Dell computer is uniquely identified by a Service Tag or Express Service Code. To view relevant support resources for your Dell computer, enter the Service Tag or Express Service Code at www.dell.com/support. For more information on
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Inspiron 16 7630 2-in-1
Service Manual
Regulatory Model: P128F
Regulatory Type: P128F001
December 2022
Rev. A00