Dell Inspiron 530S Owner's Manual - Page 171
System Board Screws, board is replaced.
View all Dell Inspiron 530S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
1 Follow the procedures in "Before You Begin" on page 103. 2 Remove the computer cover (see "Removing the Computer Cover" on page 105). 3 Remove any add-in cards on the system board (see "Cards" on page 128). 4 Remove the processor and heat sink assembly (see "I/O Panel" on page 161). 5 Remove the memory modules (see "Removing Memory" on page 127) and document which memory module is removed from each memory socket so that the memory modules can be installed in the same location after the board is replaced. 6 Disconnect all cables from the system board. Note the routing of all cables as you remove them so that you can re-route them correctly after installing the new system board. 7 Remove the eight screws from the system board. 8 Lift the system board up and out. System Board Screws Inspiron 530s/530sa/530sc 1 2 1 screws (8) 2 system board Removing and Installing Parts 171