Dell Latitude C400 Replacing the Display
Dell Latitude C400 Manual
View all Dell Latitude C400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell Latitude C400 manual content summary:
- Dell Latitude C400 | Replacing
the Display - Page 1
Dell™ Latitude™ C400 Replacing the Display www.dell.com | support.dell.com - Dell Latitude C400 | Replacing
the Display - Page 2
to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or of Dell Computer Corporation is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and Latitude are trademarks of Dell Computer - Dell Latitude C400 | Replacing
the Display - Page 3
display in your Dell Latitude C400 computer. The display and the top cover of the computer are designed to be removed and replaced as one unit. CAUTION: Before performing the following procedures, read "Safety and EMC Instructions: Portable Computers" in your System Information guide. Removing the - Dell Latitude C400 | Replacing
the Display - Page 4
www.dell.com | support.dell.com 3 Turn the computer right-side up and open it. 1 3 2 1 display 2 center cover 3 computer base 4 Replacing the Display - Dell Latitude C400 | Replacing
the Display - Page 5
left release slot on the front edge of the center cover. Press down the and keys to locate the right release slot. c To protect the keyboard, place a flexible straightedge (such as the ruler in the illustration) across the rows of keys directly in front of the center cover, touching the front - Dell Latitude C400 | Replacing
the Display - Page 6
www.dell.com | support.dell.com 5 Close the display. 6 Turn the computer over and remove the two 6-mm screws at the back corners of the computer. Put the screws aside in a safe place. Display Screws 7 Turn the computer right-side up and open the display all the way. 6 Replacing the Display - Dell Latitude C400 | Replacing
the Display - Page 7
8 Disconnect the display cable assembly from the computer base. 1 4 2 3 1 12-mm securing board screws (2) 2 securing board 3 pull tab 4 display cable assembly a Remove the two 12-mm screws from the securing board. b Use the pull tab to pull the securing board up out of its connector. Replacing the - Dell Latitude C400 | Replacing
the Display - Page 8
www.dell.com | support.dell.com 9 Pivot the display upright and lift it out of the computer. 8 Replacing the Display - Dell Latitude C400 | Replacing
the Display - Page 9
1 Position the replacement display upright and align its hinges with the slots at the back corners of the avoid trapping or pinching the cable when you insert the display. 2 Carefully insert the display hinges into the slots. 3 Ensure that the display is fully seated, and then carefully pivot - Dell Latitude C400 | Replacing
the Display - Page 10
www.dell.com | support.dell.com 4 Press the display-cable securing board firmly into its connector in the computer base, and replace the two 12-mm screws you removed in step 8 of the previous procedure (or use the new screws provided with the display kit). 10 Re plac ing the Display - Dell Latitude C400 | Replacing
the Display - Page 11
of the cover to snap those areas into place. Then press the rest of the cover down, working outward toward the ends. 7 To replace the battery, slide it into the battery bay until the latch release clicks. Replacing the Display 11 - Dell Latitude C400 | Replacing
the Display - Page 12
www.dell.com | support.dell.com 12 Re plac ing the Display - Dell Latitude C400 | Replacing the Display - Page 13
- Dell Latitude C400 | Replacing
the Display - Page 14
Printed in the U.S.A. www.dell.com | support.dell.com 08M232A00 P/N 8M232 Rev. A00
www.dell.com | support.dell.com
Dell™ Latitude™ C400
Replacing the Display