Dell Latitude ST Owner's Manual - Page 48

Installing The System Board, After Working Inside Your Computer

Page 48 highlights

15. Lift up the system board and remove it from the computer. Installing The System Board 1. Tighten the screw that secures the system board to the middle frame assembly. 2. Turn the middle-frame assembly over, and connect the camera cable to the system board, docking board cable, speaker cable, and the coin-cell battery cable. 3. Connect and flip down the securing clips of the power button board cable and I/O board cable. 4. Install the middle frame assembly. 5. Install the internal storage device. 6. Install the WWAN card. 7. Install the WLAN card. 8. Install the battery. 9. Install the bottom cover. 10. Install the phone SIM card. 11. Install the label door. 12. Install the SD memory card. 13. Install the digitizer pen. 14. Follow the procedures in After Working Inside Your Computer. 48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65

15.
Lift up the system board and remove it from the computer.
Installing The System Board
1.
Tighten the screw that secures the system board to the middle frame assembly.
2.
Turn the middle-frame assembly over, and connect the camera cable to the system board, docking board cable,
speaker cable, and the coin-cell battery cable.
3.
Connect and flip down the securing clips of the power button board cable and I/O board cable.
4.
Install the
middle frame assembly
.
5.
Install the
internal storage device
.
6.
Install the
WWAN card
.
7.
Install the
WLAN card
.
8.
Install the
battery
.
9.
Install the
bottom cover
.
10.
Install the
phone SIM card
.
11.
Install the
label door
.
12.
Install the
SD memory card
.
13.
Install the
digitizer pen
.
14.
Follow the procedures in
After Working Inside Your Computer
.
48