Dell OptiPlex 780 Dell Mounting Bracket - User's Guide (Ultra Small Form Fa
Dell OptiPlex 780 Manual
View all Dell OptiPlex 780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell OptiPlex 780 manual content summary:
- Dell OptiPlex 780 | Dell Mounting Bracket - User's Guide (Ultra
Small Form Fa - Page 1
dell.com/regulatory_compliance User's Guide Dell™ OptiPlex™ 780-USFF Mounting Bracket Wall with Wood Stud Mount Under Desk Mount The Dell OptiPlex 780-USFF Mounting Bracket supports the System in vertical or horizontal orientations. www.dell.com support.dell.com 1 of 14 - Dell OptiPlex 780 | Dell Mounting Bracket - User's Guide (Ultra
Small Form Fa - Page 2
Symbols Review These indicates important information that helps you make better use of your Dell Mounting Bracket. CAUTION A CAUTION indicates either potential damage to hardware loss of data and tells you how to avoid the problem. WARNING A WARNING indicates either potential for property damage - Dell OptiPlex 780 | Dell Mounting Bracket - User's Guide (Ultra
Small Form Fa - Page 3
Contents 1 About your Dell OptiPlex 780-USFF Mounting Bracket 4 2 Setting up your Dell OptiPlex 780-USFF Mounting Bracket 4 3 Specifications...14 4 Finding Information...14 3 of 14 - Dell OptiPlex 780 | Dell Mounting Bracket - User's Guide (Ultra
Small Form Fa - Page 4
Chassis (ordered separately) Setting up the Dell OptiPlex 780-USFF Mounting Bracket 2 Components Mounting Bracket, System Sleeve, two Lag Screws 2x M8 x 80 mm WARNING: Because surfaces vary widely and the ultimate mounting method is out of DELL's control, it is imperative that you consult - Dell OptiPlex 780 | Dell Mounting Bracket - User's Guide (Ultra
Small Form Fa - Page 5
1 Ensure the system sleeve is unlocked, (orange tab will show). 2 Extend the system label carrier. 5 of 14 - Dell OptiPlex 780 | Dell Mounting Bracket - User's Guide (Ultra
Small Form Fa - Page 6
3 Insert the system into the system sleeve in the orientation appropriate to the mounting method as illustrated below. CAUTION: Do not reverse the insertion order. The system must be inserted in the orientation specified to ensure proper functioning of the CD tray! Wood Stud Wall Mount Insert the - Dell OptiPlex 780 | Dell Mounting Bracket - User's Guide (Ultra
Small Form Fa - Page 7
the mounting method (Wall or Under Desk), then follow the appropriate instructions on the pages noted below. Wood Stud Wall Mount Under Desk with bracket. Use appropriate fasteners to attach to a solid mounting surface that can support 50 lbs. (23 kg). At a minimum, the mounting surface should be - Dell OptiPlex 780 | Dell Mounting Bracket - User's Guide (Ultra
Small Form Fa - Page 8
Wood Stud Wall Mount Steps Stud Finder 6 Attach the mounting bracket to the wood stud. 2 1 NOTE: The following tools are required for installation to the wall stud: stud finder, measuring tape, pencil, level, safety glasses, power drill with 3/16" (5mm bit suitable for wood). Ø 5 mm (3/16") - Dell OptiPlex 780 | Dell Mounting Bracket - User's Guide (Ultra
Small Form Fa - Page 9
a b c Stud Finder d e Ø 5 mm (3/16") M8 x 80 mm 2x f Lower the system onto the wall-mounted bracket. CAUTION: Make sure the wall mount bracket is level, flush and snuggly fitted to the wall surface. 9 of 14 - Dell OptiPlex 780 | Dell Mounting Bracket - User's Guide (Ultra
Small Form Fa - Page 10
To remove the system from the mounting bracket: a Push the quick release tab backward. b Lift the system upward until it is free of the bracket. a b Under Desk Mount Steps 6 Mark the mounting hole locations using the measurements provided on the next pages. NOTE: The following tools are required - Dell OptiPlex 780 | Dell Mounting Bracket - User's Guide (Ultra
Small Form Fa - Page 11
Under Desk Clearance during assembly Wall / Desk ≥6.0" (152.4 mm) Wall / Desk ≥6.0" (152.4 mm) ≤4.25" (108 mm) ≤ .5" (12.7 mm) Edge of Desk Under Desk Clearance after assembly Wall / Desk ≥6.0" (152.4 mm) ≥6.0" (152.4 mm) ≤ .5" (12.7 m≤m) ≤4.25" (108 mm) Wall / Desk Edge of Desk 11 of 14 - Dell OptiPlex 780 | Dell Mounting Bracket - User's Guide (Ultra
Small Form Fa - Page 12
bracket underneath the desk. CAUTION: Mounting fasteners are not included with bracket. Use appropriate fasteners to attach to a solid mounting surface that can support 50 lbs. (23 kg). At a minimum, the mounting surface should be 1/2" (1.25 cm) thick wood and mount using 4 metal wood screws (M4 - Dell OptiPlex 780 | Dell Mounting Bracket - User's Guide (Ultra
Small Form Fa - Page 13
To remove the system from the mounting bracket: a Push the quick release tab upward. b Slide the system toward the right until it is free of the bracket. a b 13 of 14 - Dell OptiPlex 780 | Dell Mounting Bracket - User's Guide (Ultra
Small Form Fa - Page 14
Dell System: OptiPlex 780-USFF ≤ 7 lbs (3.2 kg) Temperature Operating Storage Transportation 32°F to 95°F (0°C to 35°C ) -40°F to 149°F (-40°C to +69°C) -40°F to 149°F (-40°C to +69°C) 3 Finding Information 4 If you need to: Find safety best practices information for your computer, review
1 of 14
Dell™ OptiPlex™ 780-USFF Mounting Bracket
The Dell OptiPlex 780-USFF Mounting Bracket supports the System
in vertical or horizontal orientations.
Under Desk Mount
Wall with Wood Stud Mount
dell.com/regulatory_compliance
User’s Guide
www.dell.com
support.dell.com