Dell OptiPlex 9010 AIO Owner's Manual - Page 11
Installing the VESA Mount Bracket, Removing the Converter Board
View all Dell OptiPlex 9010 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installing the VESA Mount Bracket 1. Align and place the bracket on the back of the computer. 2. Tighten the screws to secure the VESA mount bracket to the computer. 3. Install the: a) back cover b) VESA stand 4. Follow the procedures in After Working Inside Your Computer. Removing the Converter Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) VESA stand b) back cover 3. Disconnect the backlight and converter cables from the converter board. Remove the screws that secure the converter board to the computer. Lift the convertor board away from the computer. 11
Installing the VESA Mount Bracket
1.
Align and place the bracket on the back of the computer.
2.
Tighten the screws to secure the VESA mount bracket to the computer.
3.
Install the:
a)
back cover
b)
VESA stand
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Converter Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
VESA stand
b)
back cover
3.
Disconnect the backlight and converter cables from the converter board. Remove the screws that secure the
converter board to the computer. Lift the convertor board away from the computer.
11