Dell OptiPlex 9010 AIO Owner's Manual - Page 15
Installing the Optical Drive, Removing the Hard Drive - hard drive removal
View all Dell OptiPlex 9010 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installing the Optical Drive 1. Place the optical-drive bracket on the optical drive. 2. Tighten the screws that secure the optical-drive bracket to the optical drive. 3. Align and slide the optical drive into its slot. 4. Connect the optical-drive cable. 5. Tighten the screws that secure the optical drive to the computer. 6. Install the: a) VESA mount bracket b) back cover c) VESA stand 7. Follow the procedures in After Working Inside Your Computer. Removing the Hard Drive 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) VESA stand b) back cover c) VESA mount bracket 3. Unthread the cables from the notches on the hard-drive bracket. Disconnect the hard-drive cables from the hard drive. 15
Installing the Optical Drive
1.
Place the optical-drive bracket on the optical drive.
2.
Tighten the screws that secure the optical-drive bracket to the optical drive.
3.
Align and slide the optical drive into its slot.
4.
Connect the optical-drive cable.
5.
Tighten the screws that secure the optical drive to the computer.
6.
Install the:
a)
VESA mount bracket
b)
back cover
c)
VESA stand
7.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Hard Drive
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
VESA stand
b)
back cover
c)
VESA mount bracket
3.
Unthread the cables from the notches on the hard-drive bracket. Disconnect the hard-drive cables from the hard
drive.
15