Dell OptiPlex 9010 AIO Owner's Manual - Page 22
Removing the Heat-Sink Assembly, Installing the Heat-Sink Assembly, Removing the Input/Output Board
View all Dell OptiPlex 9010 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
6. Follow the procedures in After Working Inside Your Computer. Removing the Heat-Sink Assembly 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) VESA stand b) back cover c) VESA mount bracket d) system-board shield 3. Remove the screws that secure the thermal module to the chassis. Lift the heat-sink assembly up and remove it from the computer. Installing the Heat-Sink Assembly 1. Align and place the heat-sink assembly on the computer. 2. Tighten the screws to secure the heat-sink assembly to the chassis. 3. Install: a) system-board shield b) VESA mount bracket c) back cover d) VESA stand 4. Follow the procedures in After Working Inside Your Computer. Removing the Input/Output Board Shield 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) VESA stand b) back cover c) VESA mount bracket d) system-board shield e) power-supply fan 3. Lift the input/output panel away from the computer. 22