Dell OptiPlex 9010 AIO Statement of Volatility
Dell OptiPlex 9010 AIO Manual
 |
View all Dell OptiPlex 9010 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell OptiPlex 9010 AIO manual content summary:
- Dell OptiPlex 9010 AIO | Statement of Volatility - Page 1
to hardware or loss of data and tells you how to avoid the problem. The Dell OptiPlex 9010 AIO contains both volatile and non-volatile (NV) components. Volatile components lose their data immediately after power is removed from the component. Non-volatile (NV) components continue to retain their - Dell OptiPlex 9010 AIO | Statement of Volatility - Page 2
Hard drive(s) CDROM/RW/ DVD/ DVD+RW/ Diskette Drives Reference Designator Volatility Description User Accessible for external data Remedial Action (Action necessary to prevent loss of data) User Non Volatile magnetic media, Yes replaceable various sizes in GB. May also - one. be SSD
-
1 -
2
 |
 |
Month yyyy
Statement of Volatility – Dell OptiPlex 9010 AIO
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
The Dell
OptiPlex 9010 AIO
contains both volatile and non-volatile (NV) components. Volatile components lose their data
immediately after power is removed from the component. Non-volatile (NV) components continue to retain their data even
after power is removed from the component. The following NV components are present on the
OptiPlex 9010 AIO
system
board.
Table 1. List of Non-Volatile Components on System Board
Description
Reference
Designator
Volatility Description
User
Accessible
for external
data
Remedial Action (Action
necessary to prevent loss of
data)
Embedded
Flash in
embedded
controller
SMSC5545
O2U1
96K bytes non-volatile memory.
2K bytes of on-chip ROM for
keyboard controller.256 bytes of
on-chip RAM.
No
N/A
Panel EDID
& setting in
eDP
converter IC
U29
Non Volatile memory, 1024
bytes.
No
N/A
System
BIOS
F3U1,
F3U2
Non Volatile memory, 64 Mbit
(8 MB) & 32 Mbit(4 MB),
System BIOS and Video BIOS
for basic boot operation, PSA
(on board diags), PXE diags.
No
N/A
System
Memory –
DDR3
memory
Two
SODIMM
connectors:
XMM1,3
Volatile memory in OFF state
One to two modules must be
populated.
System memory
size will depend on SODIMM
modules and must be between
2 GB and 16 GB.
Yes
Power off system
Media Card
–
SD/MS/MM
C/xD
One media
card slot:
CON4003
Non Volatile memory
Yes
N/A
System
memory
SPD
EEPROM
On System
memory
SODIMM(
s) – 2
present
Non Volatile memory 512
Bytes.
Stores memory manufacturer
data and timing information
for correct operation of system
memory.
No
N/A
TPM
U9421
4K bytes non-volatile memory
located in the TPM module.
No
N/A
RTC CMOS
BATTERY
Volatile battery back-backed
CMOS memory 256 bytes. Stores
CMOS information.
No
Removing the on board Coin Cell
battery.