Dell PowerConnect 2848 User's Guide - Page 111
Unknown Unicast, Multicast & Broadcast, Storm Control Table
View all Dell PowerConnect 2848 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Figure 7-12. Storm Control • Port - The port from which storm control is enabled. • Broadcast Control - Enables or disables forwarding broadcast packet types on the device. • Mode - Specifies the Broadcast mode currently enabled on the device. The possible field value are: - Unknown Unicast, Multicast & Broadcast - Counts unknown Unicast, Multicast, and Broadcast traffic. - Multicast & Broadcast - Counts Broadcast and Multicast traffic together. - Broadcast Only - Counts only Broadcast traffic. • Rate Threshold (3.5-1000M)- The maximum rate (Kbits/Sec) at which packets are forwarded. The range is 3.5-1000M. Enabling Storm Control on the Device 1 Open the Storm Control page. 2 Select an interface on which to implement storm control. 3 Define the fields. 4 Click Apply Changes. The Storm Control is enabled on the device. Displaying the Storm Control Table 1 Open the Storm Control page. 2 Click Show All. The Storm Control Table opens: Update with your book title 111