Dell PowerConnect 2848 User's Guide - Page 113
Port Mirroring, Switch, Ports, Destination Port, Source Port, Status, Active, notReady, Remove
View all Dell PowerConnect 2848 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
The following restrictions apply to ports configured to be source ports: • Source Ports cannot be a LAG member. • Ports cannot be configured as a destination port. • All packets are transmitted tagged from the destination port. • Monitored all RX/TX packets to the same port. To open the Port Mirroring page, click Switch→ Ports→ Port Mirroring in the tree view. Figure 7-14. Port Mirroring • Destination Port - The port number to which port traffic is copied. • Source Port - Defines the port number from which port traffic is mirrored. • Type - Indicates if the source port is RX, TX, or both RX and TX. • Status - Indicates if the port is currently monitored (Active) or not monitored (notReady). There are four monitoring sessions. • Remove - When selected, removes the port mirroring session. Adding a Port Mirroring Session 1 Open the Port Mirroring page. 2 Click Add. The Add Source Port page opens. 3 Select the destination port from the Destination Port drop-down menu. 4 Select the source port from the Source Port drop-down menu. 5 Define the Type field. Update with your book title 113