Dell PowerConnect 5012 User Manual

Dell PowerConnect 5012 Manual

Get Dell PowerConnect 5012 PDF manuals and user guides View all Dell PowerConnect 5012 manuals
Add to My Manuals
Save this manual to your list of manuals

Dell PowerConnect 5012 manual content summary:

  • Dell PowerConnect 5012 | User Manual - Page 1
    Dell™ PowerConnect™ 3024, 3048, and 5012 Network Switches Addendum to the 3024, 3048, and 5012 User's Guides www.dell.com | support.dell.com
  • Dell PowerConnect 5012 | User Manual - Page 2
    Computer Corporation is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and PowerConnect are trademarks of Dell Computer Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products
  • Dell PowerConnect 5012 | User Manual - Page 3
    Statistics/Utilization Summary NOTE: The features described in this section apply to both the Web interface and the console interface for your switch. NOTE: The graphics in this section may differ slightly from the graphics on your computer. Addendum to the 3024, 3048, and 5012 User's Guides 3
  • Dell PowerConnect 5012 | User Manual - Page 4
    www.dell.com | support.dell.com System Manager/IP Settings: • IP Assignment Mode - Sets whether IP functionality is enabled through manual (static) configuration or set by Dynamic Host Configuration Protocol (DHCP) or Boot Protocol (BootP). - Manual - Sets static IP address. - BootP - Gets IP
  • Dell PowerConnect 5012 | User Manual - Page 5
    - Specifies the text string that is shared between the switch and the RADIUS server. • IP Filtering - Allows up to 16 IP addresses to access the switch management function, if enabled. • Password Admin - Enables or disables password protection. Addendum to the 3024, 3048, and 5012 User's Guides 5
  • Dell PowerConnect 5012 | User Manual - Page 6
    www.dell.com | support.dell.com • Allowed IP Addresses - You can enter up to 16 IP addresses in the Allowed IP Address table. • Disable Telnet/Web Access (Console Only) - Provides an option to enable or disable Telnet or Web access to the switch. 6 Addendum to the 3024, 3048, and 5012 User's Guides
  • Dell PowerConnect 5012 | User Manual - Page 7
    the default ToS priority by selecting Normal Priority or High Priority for each class of services. This setting leverages the IETF definition of the IPv4 Type of Service (ToS) octet in the IP packet-header by using the Differentiated Services Code. Addendum to the 3024, 3048, and 5012 User's Guides
  • Dell PowerConnect 5012 | User Manual - Page 8
    www.dell.com | support.dell.com • Point (DSCP) field(6 bits) classifies packets into any of the 64 possible classes. 8 Addendum to the 3024, 3048, and 5012 User's Guides
  • Dell PowerConnect 5012 | User Manual - Page 9
    authorization is disabled, which is the default setting, the switch allows any SNMP manager to access the switch. If the host authorization is enabled, the administrator can specify up to 16 SNMP managers on the host table to access the switch. Addendum to the 3024, 3048, and 5012 User's Guides 9
  • Dell PowerConnect 5012 | User Manual - Page 10
    www.dell.com | support.dell.com 10 Addendum to the 30 24, 3048 , and 5 012 Us er 's Guides
  • Dell PowerConnect 5012 | User Manual - Page 11
    /Counter Reset: Reset - Allows you to reset all statistics counters. • Statistics/Utilization Summary - Allows you to view a summary by port of the link status, percent utilization, ratio of incoming unicast, nonunicast, and error packets. Addendum to the 30 24, 3048 , and 5012 User 's Guides 11
  • Dell PowerConnect 5012 | User Manual - Page 12
    www.dell.com | support.dell.com • Refresh - Allows you to refresh the Utilization Summary page. • Statistics/Counter Summary - Allows you to view all ports accumulated, transmitted, and received unicast, nonunicast and error packets. • Refresh - Allows you to refresh the Counter Summary page. 12
  • Dell PowerConnect 5012 | User Manual - Page 13
    Addendum to the 30 24, 3048 , and 5012 User 's Guides 13
  • Dell PowerConnect 5012 | User Manual - Page 14
    www.dell.com | support.dell.com Configuration File Management: • To save the switch's current configuration file to a server, supply the TFTP server IP address and configuration filename, and then select Transfer Configuration File to Server. To load a configuration file from a server, supply the
  • Dell PowerConnect 5012 | User Manual - Page 15
    Addendum to the 30 24, 3048 , and 5012 User 's Guides 15
  • Dell PowerConnect 5012 | User Manual - Page 16
    www.dell.com | support.dell.com 16 Addendum to the 30 24, 3048 , and 5 012 Us er 's Guides
  • Dell PowerConnect 5012 | User Manual - Page 17
  • Dell PowerConnect 5012 | User Manual - Page 18
    Printed in China. 09X417A00 P/N 9X417 Rev. A00 www.dell.com | support.dell.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
www.dell.com | support.dell.com
Dell™ PowerConnect™ 3024, 3048, and 5012 Network Switches
Addendum to the 3024, 3048,
and 5012 User’s Guides