Dell PowerConnect 5448 User's Guide - Page 216
Community String 1-20 Characters, UDP Port 1-65535
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
• Recipient IP - Indicates the IP address to whom the traps are sent. - Notification Type - The notification sent. The possible field values are: - Traps - Traps are sent. - Informs - Informs are sent. • SNMPv1,2 - SNMP versions 1 and 2 are enabled for the selected recipient. Define the following fields for SNMPv1 and SNMPv2: • Community String (1-20 Characters) - Identifies the community string of the trap manager. - Notification Version - Determines the trap type. The possible field values are: - SNMPv1 - SNMP Version 1 traps are sent. - SNMPv2 - SNMP Version 2 traps are sent. • SNMPv3 - SNMPv3 is used to send and receive traps. Define the following fields for SNMPv3: • User Name - The user to whom SNMP notifications are sent. • Security Level - Defines the means by which the packet is authenticated. The possible field values are: - No Authentication - The packet is neither authenticated nor encrypted. - Authentication - The packet is authenticated. - Privacy - The packet is both authenticated and encrypted. • UDP Port (1-65535) - The UDP port used to send notifications. The default is 162. • Filter Name - Includes or excludes SNMP filters. • Timeout (1-300) - The amount of time (seconds) the device waits before resending informs. The default is 15 seconds. • Retries (1-255) - The amount of times the device resends an inform request. The default is 3. • Remove Notification Recipient - When checked, removes selected notification recipients. When adding a Notification Recipient, the following additional parameters are available: • Supported IP Format - Specifies the IP format supported by the recipient. The possible values are: - IPv6 - IP version 6 is supported. - IPv4 - IP version 4 is supported. 216 Configuring System Information