Dell PowerConnect Brocade 300 Fabric OS Administrator's Guide v7.1.0 - Page 294

10 Deleting a logical switch switchMode: Native switchRole: Principal switchDomain: 14 switchId: fffc0e switchWwn: 10:00:00:05:1e:82:3c:2b zoning: OFF switchBeacon: OFF FC Router: OFF Fabric Name: Fab4 Allow XISL Use: ON LS Attributes: [FID: 4, Base Switch: No, Default Switch: No, Address Mode 0] Index Port Address Media Speed State Proto 22 22 0e1600 -- N8 No_Module FC Disabled 23 23 0e1700 -- N8 No_Module FC Disabled Example 2: Executing the fabricShow command on all logical switches sw0:FID128:admin> fosexec --fid all -cmd "fabricshow fabricshow" on FID 128: Switch ID Worldwide Name Enet IP Addr FC IP Addr Name 97: fffc61 10:00:00:05:1e:82:3c:2a 10.32.79.105 0.0.0.0 >"sw0" "fabricshow" on FID 4: Switch ID Worldwide Name Enet IP Addr FC IP Addr Name 14: fffc0e 10:00:00:05:1e:82:3c:2b 10.32.79.105 0.0.0.0 >"switch_4" (output truncated) Deleting a logical switch The following rules apply to deleting a logical switch: • You must remove all ports from the logical switch before deleting it. • You cannot delete the default logical switch. NOTE If you are in the context of the logical switch you want to delete, you are automatically logged out when the fabric ID changes. To avoid being logged out, make sure you are in the context of a different logical switch from the one you are deleting. Use the following procedure to delete a logical switch: 1. Connect to the physical chassis and log in using an account with admin permissions. 2. Remove all ports from the logical switch as described in "Adding and moving ports on a logical switch." 3. Enter the lsCfg command to delete the logical switch: lscfg --delete fabricID The fabricID parameter is the fabric ID of the logical switch to be deleted. 294 Fabric OS Administrator's Guide 53-1002745-02