Dell PowerConnect Brocade 300 Fabric OS Administrator's Guide v7.1.0 - Page 335

Zone object maintenance 11 You are about to expunge one configuration or member. This action could result in removing many zoning configurations recursively. [Removing the last member of a configuration removes the configuration.] Do you want to expunge the member? (yes, y, no, n): [no] yes 4. Enter yes at the prompt. 5. Use cfgShow to verify the deleted zone object is no longer present. 6. If you want the change preserved when the switch reboots, use cfgSave to save it to nonvolatile (flash) memory. 7. Use cfgEnable for the appropriate zone configuration to make the change effective. Renaming a zone object Use the following procedure to rename a zone object: 1. Connect to the switch and log in using an account with admin permissions. 2. Use cfgShow to view the zone configuration objects you want to rename. switch:admin> cfgShow Defined configuration: cfg: USA_cfg Purple_zone; White_zone; Blue_zone zone: Blue_zone 1,1; array1; 1,2; array2 zone: Purple_zone 1,0; loop1 zone: White_zone 1,3; 1,4 alias: array1 21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02 alias: array2 21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28 alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df 3. Use zoneObjectRename to rename zone configuration objects. NOTE Zone configuration names are case-sensitive, blank spaces are ignored, and the zoneObjectRename command works in any Admin Domain except AD255. switch:admin> zoneObjectRename "White_zone", "Purple_zone" 4. Enter the cfgShow command to verify the renamed zone object is present. 5. If you want the change preserved when the switch reboots, enter the cfgSave command to save it to nonvolatile (flash) memory. 6. Enter the cfgEnable command for the appropriate zone configuration to make the change effective. Fabric OS Administrator's Guide 335 53-1002745-02