Dell PowerConnect Brocade 300 Fabric OS Administrator's Guide v7.1.0 - Page 359

Limitations and restrictions of Traffic Isolation Zoning 12 Trunking with TI zones If you implement trunking and TI zones, you should keep the following points in mind: • To include a trunk group in a TI zone, you must include all ports of the trunk in the TI zone. • Trunked ISL ports cannot be members of more than one TI zone. • The zone command includes an option to show TI trunk errors: zone --showTItrunkerrors Description This command parameter displays the details of the trunk members in the TI zone, separated into present and not present, and displayed per TI Zone basis. Sample output switch:admin> zone --showTItrunkerrors TI Zone Name: brackets E-Port Trunks Trunk members in TI zone: 16 18 Trunk members not in TI zone: 17 F-Port Trunks Trunk members in TI zone: 4 5 Trunk members not in TI zone: 6 TI Zone Name: loop E-Port Trunks Trunk members in TI zone: 0 Trunk members not in TI zone: 1 TI Zone Name: operand E-Port Trunks Trunk members in TI zone: 8 Trunk members not in TI zone: 9 10 E-Port Trunks Trunk members in TI zone: 16 Trunk members not in TI zone: 17 18 Limitations and restrictions of Traffic Isolation Zoning The following limitations and restrictions apply to Traffic Isolation Zoning: • For switches running Fabric OS 6.1.0 or later, a maximum of 255 TI zones can be created in one fabric. For switches running Fabric OS 6.0.x, no more than 239 TI zones should be created. A fabric merge resulting in greater than the maximum allowed TI zones results in merge failure and the fabrics are segmented. • A TI zone can be created using D,I (Domain, Index) notation only, except for TI zones in a backbone fabric, which use port WWNs. See "Traffic Isolation Zoning over FC routers" on page 352 for information about TI zones in a backbone fabric. Fabric OS Administrator's Guide 359 53-1002745-02