Dell PowerConnect Brocade 300 Fabric OS Administrator's Guide v7.1.0 - Page 369

Deleting a TI zone 12 Deleting a TI zone Use the zone --delete command to delete a TI zone from the defined configuration. This command deletes the entire zone; to only remove port members from a TI zone, use the zone --remove command, as described in "Modifying TI zones" on page 367. 1. Connect to the switch and log in using an account with admin permissions. 2. Enter the zone --delete command. zone --delete name You can delete multiple zones by separating the zone names with a semicolon and enclosing them in quotation marks. 3. Enter the cfgEnable command to reactivate your current effective configuration and enforce the TI zones. cfgenable "current_effective_configuration" Example of deleting a TI zone To delete the TI zone bluezone, type: switch:admin> zone --delete bluezone Remember that your changes are not enforced until you enter the cfgEnable command. Displaying TI zones Use the zone --show command to display information about TI zones. This command displays the following information for each zone: • Zone name • E_Port members • N_Port members • Configured status (the latest status, which may or may not have been activated by cfgEnable) • Enabled status (the status that has been activated by cfgEnable) If you enter the cfgShow command to display information about all zones, the TI zones appear in the defined zone configuration only and do not appear in the effective zone configuration. 1. Connect to the switch and log in using an account with admin permissions. 2. Enter the zone --show command. zone --show [ name ] [-ascending] Example displaying information about the TI zone purplezone switch:admin> zone --show purplezone Defined TI zone configuration: TI Zone Name: redzone: Port List: 1,2; 1,3; 3,3; 4,5 Configured Status: Activated / Failover-Enabled Enabled Status: Activated / Failover-Enabled Fabric OS Administrator's Guide 369 53-1002745-02