Dell PowerConnect Brocade 300 Fabric OS Administrator's Guide v7.1.0 - Page 47

Management server database 1 Example of adding a member to the management server ACL switch:admin> msconfigure 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 2 Port/Node WWN (in hex): [00:00:00:00:00:00:00:00] 20:00:00:20:37:65:ce:aa *WWN is successfully added to the MS ACL. 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [2] 1 MS Access List consists of (14): { 20:00:00:20:37:65:ce:aa 20:00:00:20:37:65:ce:bb 20:00:00:20:37:65:ce:ff 20:00:00:20:37:65:ce:11 20:00:00:20:37:65:ce:22 20:00:00:20:37:65:ce:33 20:00:00:20:37:65:ce:44 10:00:00:60:69:04:11:24 10:00:00:60:69:04:11:23 21:00:00:e0:8b:04:70:3b 10:00:00:60:69:04:11:33 20:00:00:20:37:65:ce:55 20:00:00:20:37:65:ce:66 00:00:00:00:00:00:00:00 } 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 0 done ... Update the FLASH? (yes, y, no, n): [yes] y *Successfully saved the MS ACL to the flash. Deleting a member from the ACL When you delete a member from the ACL, that member no longer has access to the management server. NOTE If you delete the last member of the ACL, leaving the ACL list is empty, then the management server will be accessible to all systems connected in-band to the fabric. Use the following procedure to delete a member from the ACL: 1. Connect to the switch and log in using an account with admin permissions. 2. Enter the msConfigure command. The command becomes interactive. 3. At the "select" prompt, enter 3 to delete a member based on its port/node WWN. 4. At the "Port/Node WWN" prompt, enter the WWN of the member to be deleted from the ACL. Fabric OS Administrator's Guide 47 53-1002745-02