Dell PowerConnect Brocade 300 Fabric OS Administrator's Guide v7.1.0 - Page 597

LSAN zone configuration 24 • The tag is from 1 through 8 alphanumeric characters. • You can configure only one Speed tag on an FC router, and up to eight Enforce tags on an FC router. The maximum number of tags (Enforce and Speed) on an FC router is eight. • Up to 500 Speed LSAN tags are supported. Configuring an Enforce LSAN tag 1. Log in to the FC router as admin. 2. Enter the following command to disable the FC router: switchdisable 3. Enter the following command to create an Enforce LSAN tag: fcrlsan --add -enforce tagname The tagname variable is the name of the LSAN tag you want to create. 4. Enter the following command to enable the FC router: switchenable 5. Change the names of the LSAN zones in the edge fabrics to incorporate the tag in the names. Example sw0:admin> switchdisable sw0:admin> fcrlsan --add -enforce enftag1 LSAN tag set successfully sw0:admin> switchenable Configuring a Speed LSAN tag 1. Log in to the FC router as admin. 2. Enter the following command to create a Speed LSAN tag: fcrlsan --add -speed tagname The tagname variable is the name of the LSAN tag you want to create. 3. Change the names of the LSAN zones in the edge fabrics to incorporate the tag in the names. 4. Toggle the host or target port to trigger the fast import process. Example sw0:admin> fcrlsan --add -speed fasttag2 LSAN tag set successfully Removing an LSAN tag Use the following procedure to remove an LSAN tag. This procedure does not remove the LSAN zone; it deactivates the tag so that LSAN zones with this tag in the name now behave as regular LSAN zones. You must disable the switch before removing an Enforce LSAN tag. You do not need to disable the switch to remove a Speed LSAN tag. Fabric OS Administrator's Guide 597 53-1002745-02