Dell PowerConnect Brocade 300 Fabric OS Administrator's Guide v7.1.0 - Page 605

Resource monitoring 24 You can monitor FC router resources using the fcrResourceShow command. The fcrResourceShow command shows FCR resource limits and usage and includes the following: • LSAN zones and LSAN devices - The information shows the maximum versus the currently used zones and device database entries. Each proxy or physical device constitutes an entry. If LSAN zones are defined in two edge fabrics, they are counted as two and not one. One device imported into multiple edge fabrics counts multiple times. The default maximum number of LSAN zones is 3000. Refer to "Setting the maximum LSAN count" on page 594 for information on changing this limit. • Proxy Device Slots - The physical and proxy devices use the 10,000 device slots. The information shows the maximum pool size for translate phantom node and port WWNs and shows the number of translate node and port WWNs from this pool. • Phantom Node WWNs • Phantom Port WWNs • Max proxy devices • Max NR_Ports The following example shows the use of the fcrResourceShow command to display physical port (EX_Port) resources. switch:admin> fcrresourceshow Daemon Limits: Max Allowed Currently Used LSAN Zones: 3000 28 LSAN Devices: 10000 51 Proxy Device Slots: 10000 20 Phantom Node WWN: Phantom Port WWN: WWN Pool Size Allocated 8192 5413 32768 16121 Port Limits: Max proxy devices: Max NR_Ports: 2000 1000 Currently Used(column 1: proxy, column 2: NR_Ports): 0 | 0 34 1 | 3 34 4 | 0 0 5 | 0 0 6 | 0 0 7 | 0 0 8 | 6 34 9 | 6 34 10 | 6 34 11 | 6 34 12 | 6 34 13 | 6 34 14 | 6 34 15 | 6 34 16 | 8 34 17 | 8 34 18 | 8 34 19 | 8 34 Fabric OS Administrator's Guide 605 53-1002745-02