Home » Dell Manuals » Hubs & Switches » Dell PowerConnect W-3600 » Manual Viewer

Dell PowerConnect W-3600 Installation Guide

Dell PowerConnect W-3600 Manual

View all Dell PowerConnect W-3600 manuals

Add to My Manuals
Save this manual to your list of manuals

Dell PowerConnect W-3600 manual content summary:

Dell PowerConnect W-3600 | Installation Guide - Page 1
Dell PowerConnect W-3000 Series Controllers Installation Guide
Dell PowerConnect W-3600 | Installation Guide - Page 2
Aruba Networks, Inc. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without of copyright on behalf of those vendors. Dell PowerConnect W-3000 Series Controller | Installation Guide 0510762-01 | July 2010
Dell PowerConnect W-3600 | Installation Guide - Page 3
Specifications (AC Input Requirements 17 Operating Specifications...17 Storage Specifications ...18 Safety and Regulatory Compliance 18 FCC Class A Device ...18 Proper Disposal of Dell Equipment 18 European Union RoHS ...18 Dell PowerConnect W-3000 Series Controller | Installation Guide |3
Dell PowerConnect W-3600 | Installation Guide - Page 4
4| Dell PowerConnect W-3000 Series Controller | Installation Guide
Dell PowerConnect W-3600 | Installation Guide - Page 5
a Dell Controller: z Dell PowerConnect ArubaOS Quick Start Guide z Dell PowerConnect ArubaOS User Guide z Dell PowerConnect ArubaOS 5.0 Command Line Reference Contacting Dell Web Site Support Main Site Support Site Dell Documentation Software www.dell.com support.dell.com support.dell.com/manuals
Dell PowerConnect W-3600 | Installation Guide - Page 6
6 | About This Guide Dell PowerConnect W-3000 Series Controller | Installation Guide
Dell PowerConnect W-3600 | Installation Guide - Page 7
DB9) z Dell PowerConnect ArubaOS Quick Start Guide z End User License Agreement (EULA) z Safety, Environmental, and Regulatory Information (SERI) document z Warranty and Support Information (WSI) document Dell PowerConnect W-3000 Series Controller | Installation Guide About the PowerConnect W-3000
Dell PowerConnect W-3600 | Installation Guide - Page 8
supports Dell optics within their controller systems. Third party optics are not tested or supported; therefore, Dell does not guarantee proper functionality of third party optics. 8 | About the PowerConnect W-3000 Series Controllers Dell PowerConnect W-3000 Series Controller | Installation Guide
Dell PowerConnect W-3600 | Installation Guide - Page 9
not supported. Serial Console Port Adaptor A modular adaptor can be used to convert the RJ-45 (female) connector to a DB9 (male) connector. Refer to Figure 4 for complete details. Dell PowerConnect W-3000 Series Controller | Installation Guide About the PowerConnect W-3000 Series Controllers | 9
Dell PowerConnect W-3600 | Installation Guide - Page 10
. Figure 5 W-3200 Rear View AC Power Socket AC Power Socket The W-3000 Series Controllers supports integrated AC powering and the AC power socket on the rear of the unit is for 10 | About the PowerConnect W-3000 Series Controllers Dell PowerConnect W-3000 Series Controller | Installation Guide
Dell PowerConnect W-3600 | Installation Guide - Page 11
Table 2 W-3000 Series Controllers LED Status Indicators LED Function ACT 1000Base-X ports Activity Status Indicator Indicator speed in use 10/100 Mbps interface speed in use Dell PowerConnect W-3000 Series Controller | Installation Guide About the PowerConnect W-3000 Series Controllers | 11
Dell PowerConnect W-3600 | Installation Guide - Page 12
12 | About the PowerConnect W-3000 Series Controllers Dell PowerConnect W-3000 Series Controller | Installation Guide
Dell PowerConnect W-3600 | Installation Guide - Page 13
tools and equipment are required for installing the Dell PowerConnect W-3000 Series Controllers: z Rack Mount Bracket (x2, not used for tabletop installation) z Suitable Screwdrivers z AC Power Cord (country-specific) Caution: Installation and service of Dell Networks products should be performed by
Dell PowerConnect W-3600 | Installation Guide - Page 14
Figure 2 Rack Mount Installation Standard 19-inch Rack System W-3000 Series Controllers Multi-Service Controller with Rack Mount Brackets 12-24 x 5/8" Phillips Flat Head Screws (4x 3). 14 | Installing the W-3000 Series Controllers Dell PowerConnect W-3000 Series Controller | Installation Guide
Dell PowerConnect W-3600 | Installation Guide - Page 15
outlet to power the controller. Note: W-3000 Series Controllers do not have a power on/off switch. Power to the unit is controlled by inserting (or unplugging) the power cord plug into your electric outlet. Dell PowerConnect W-3000 Series Controller | Installation Guide Installing the W-3000
Dell PowerConnect W-3600 | Installation Guide - Page 16
cables or devices attached to the controller. 3. Loosen the four rack mount screws securing the controller to your organizations rack system. 4. Remove the controller from the rack system. 16 | Installing the W-3000 Series Controllers Dell PowerConnect W-3000 Series Controller | Installation Guide
Dell PowerConnect W-3600 | Installation Guide - Page 17
All Models: 44 mm x 351 mm x 297 mm Device Weight (with rack mount brackets): z W-3200: 7.1 lbs/3.2 kgs z W-3400/W-3600: 7.4 lbs/3.4 kgs z Shipping Dimensions (HxWxD): „ 95% (RH), non-condensing Dell PowerConnect W-3000 Series Controller | Installation Guide Specifications, Safety & Compliance |
Dell PowerConnect W-3600 | Installation Guide - Page 18
Dell hardware products. The Dell PowerConnect W-Series Safety, Environmental, and Regulatory Information document is included with this product. CLASS 1 LASER PRODUCT Caution: Use of controls or adjustments of performance or procedures other than those specified in this manual the instruction manual,
Dell PowerConnect W-3600 | Installation Guide - Page 19
1.5 A Model Number: 3400/3600 z Supply Voltage: 90-264 V AC z Frequency: 47-63 Hz z Current consumption: 2.2 A Proper Disposal of Dell Equipment For the most current to this Directive. Dell PowerConnect W-3000 Series Controller | Installation Guide Specifications, Safety & Compliance | 19
Dell PowerConnect W-3600 | Installation Guide - Page 20
July 2010 | 0510762-01 Dell PowerConnect W-3000 Series Controller | Installation Guide

Section	Page
Dell PowerConnect W-3000 Series Controllers	1
	3
Guide Overview	5
Related Documents	5
Contacting Dell	5
	7
About the PowerConnect W-3000 Series Controllers	7
The PowerConnect W-3000 Series Controllers consists of the following models:	7
Minimum Software Requirements	7
Package Checklist	7
Model Overview	8
Figure 1 W-3200 Front View	8
1000Base-X (SFP) Ports	8
10/100/1000Base-T Gigabit Ethernet Ports	9
Figure 2 Gigabit Ethernet Port Pin-Out	9
Serial Console Port	9
Figure 3 Serial Console Port Pin-Out	9
Table 1 Console Terminal Settings	9
Serial Console Port Adaptor	9
Figure 4 RJ-45 (female) to DB9 (male) Modular Adaptor Conversion	10
Figure 5 W-3200 Rear View	10
AC Power Socket	10
LED Status Indicators	10
Table 2 W-3000 Series Controllers LED Status Indicators	10
	13
Installing the W-3000 Series Controllers	13
The following tools and equipment are required for installing the Dell PowerConnect W-3000 Series Controllers:	13
For a Telecom Rack:	13
For a Server Rack:	13
Installation in a Telecom Rack	13
1. Place a rack mount bracket over the mounting holes on one side of the controller (see Figure 1).	13
2. Secure the bracket to the controller using three 6-32 x 1/4” phillips flat head screws and a suitable screwdriver.	13
3. Repeat these steps on the opposite side of the controller.	13
Figure 1 Rack Mount Brackets	14
4. Mount the controller within your organization’s rack system using four 12-24 x 5/8” phillips flat head screws and a suitable screwdriver (see Figure 2).	14
Figure 2 Rack Mount Installation	14
5. Leave a minimum of four inches (10 cm) of space on the left and right side of the unit for proper air flow and ventilation (see Figure 3).	14
6. Leave additional space in the front and back of the unit to access power cords, network cables, and LED status indicators (see Figure 3).	14
Figure 3 Air Flow Requirements	15
7. Connect the AC power cord (country-specific) to the rear of the unit.	15
8. Plug the opposite end of the power cord into an electrical outlet to power on the controller.	15
Installation in a Server Rack	15
1. Place a rack mount bracket over the mounting holes on one side of the controller (see Figure 1).	15
2. Secure the bracket to the controller using three 6-32 x 1/4” phillips head screws and a suitable screwdriver.	15
3. Repeat these steps on the opposite side of the controller.	15
4. Install the four cage nuts.	15
a. Begin by inserting the lower lip of the cage but over the square opeing in the back of the rail.	15
b. Insert the small end of the cage-nut installation tool through the opening in the rail (from the front), and hook the tool over the top lip of the cage nut.	15
c. Push the cage nut in towards the rail while rotating the tool up and pulling the tool back toward you until the top lip of the cage nut snaps into position.	15
5. Mount the controller within your organization’s rack system using four M6 x 20mm phillips head screws and suitable screwdriver.	15
6. Leave a minimum of four inches (10cm) of space on the left and right side of the unit for proper air flow and ventilation (see Figure 3).	15
7. Leave additional space in front and back of the unit to access power cords, network cables, and LED status indicators (see Figure 3).	15
8. Connect the AC power cord (country-specific) to the rear of the unit.	15
9. Plug the opposite end of the power cord into an electrical outlet to power the controller.	15
Tabletop Deployment	16
1. Insert the four rubber mounting feet to the bottom of the unit.	16
2. Attach side bezels by snapping them into place.	16
3. Place the unit on a hard flat surface.	16
Initial Setup and Network Connectivity	16
Removal	16
1. Disconnect the power to the controller by unplugging the power cord from the electrical outlet.	16
2. Disconnect any other cables or devices attached to the controller.	16
3. Loosen the four rack mount screws securing the controller to your organizations rack system.	16
4. Remove the controller from the rack system.	16
	17
Physical Specifications	17
All Models: 1.75” x 13.8” x 11.7”	17
All Models: 44 mm x 351 mm x 297 mm	17
All Models: 6.5” x 18.2” x 16.5”	17
All Models: 165 mm x 462 mm x 419 mm	17
W-3200: 9.4 lbs/4.3 kgs	17
W-3400/W-3600: 9.7 lbs/4.4 kgs	17
Power Management Specifications	17
Power Consumption	17
Power Specifications (AC Input Requirements)	17
AC Input Voltage: 90-264 V~, Universal Input	17
AC Input Current: 1.5 A	17
AC Input Frequency: 47-63 Hz	17
AC Input Voltage: 90-264 V~, Universal Input	17
AC Input Current: 2.2 A	17
AC Input Frequency: 47-63 Hz	17
Operating Specifications	17
Storage Specifications	18
Safety and Regulatory Compliance	18
FCC Class A Device	18
Industry Canada	18
NOM Information (Mexico Only)	19
Proper Disposal of Dell Equipment	19

Match case Limit results 1 per page

Dell PowerConnect

W-3000 Series Controllers

Installation Guide