Dell PowerConnect W-AP175 Dell PowerConnect W-AP175P Installation Guide - Page 16
Wrapping of Butyl Rubber, Butyl Rubber Placement, Butyl Rubber Wrap
View all Dell PowerConnect W-AP175 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Wrapping of Butyl Rubber 1. Cut a 3/4" (19 mm) strip of butyl rubber. 2. Wrap the strip of rubber around the taped connector (Figure 9) 3. Join the two ends by pushing them together until there is no longer a seam (Figure 10). Figure 9 Butyl Rubber Placement Cut 3/4" strip of rubber Squeeze thinner & wider Wrap rubber around base of antenna mount AP175_13 Figure 10 Butyl Rubber Wrap Wrap rubber around base of antenna mount Squeeze to bond rubber to itself Rubber will be wrapped with 4 layers of tape AP175_14 16 Dell PowerConnect W-AP175 Outdoor Access Point | Installation Guide
16
Dell PowerConnect W-AP175 Outdoor Access Point
|
Installation Guide
Wrapping of Butyl Rubber
1.
Cut a 3/4” (19 mm) strip of butyl rubber.
2.
Wrap the strip of rubber around the taped connector (
Figure 9
)
3.
Join the two ends by pushing them together until there is no longer a seam (
Figure 10
).
Figure 9
Butyl Rubber Placement
Figure 10
Butyl Rubber Wrap
Cut 3/4” strip
of rubber
Squeeze thinner
& wider
Wrap rubber
around base
of antenna
mount
AP175_13
Wrap rubber
around base
of antenna
mount
Squeeze to
bond rubber
to itself
Rubber will
be wrapped
with 4 layers
of tape
AP175_14