Dell PowerEdge 1550 Information Update (Removing the Top Cover)
Dell PowerEdge 1550 Manual
 |
View all Dell PowerEdge 1550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerEdge 1550 manual content summary:
- Dell PowerEdge 1550 | Information
Update (Removing the Top Cover) - Page 1
information in your Dell PowerEdge 1550 and PowerApp 120 systems Installation and Troubleshooting Guide. Removing the Top Cover From the System Chassis To remove or remove the system chassis from the rack by yourself. www.dell.com support.dell.com P/N 3D460 Rev. A00 December 2000 03D460 A00 - Dell PowerEdge 1550 | Information
Update (Removing the Top Cover) - Page 2
Computer Corporation. All rights reserved. Printed in the U.S.A. Trademarks used in this text: Dell, the DELL logo, PowerEdge, and PowerApp are trademarks of Dell Computer Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks
-
1 -
2
 |
 |
support.dell.com
www.dell.com
03D460 A00
P/N 3D460 Rev. A00
December 2000
Dell™ PowerEdge™ 1550 and
PowerApp™ 120 Systems
Information Update
This document updates important information in your Dell PowerEdge 1550 and PowerApp 120
systems
Installation and Troubleshooting Guide
.
Removing the Top Cover From the System Chassis
To remove the top cover from the chassis or to remove the chassis from the top cover when mounted
in a rack, press the safety latch lever (shown in the figure), and then slowly pull the chassis out to
release the latch. Once the latch has cleared the notch in the top cover, continue to pull the chassis out
slowly until the spring tabs on the outside of the chassis rails lock into the cover. If it is necessary to
remove the chassis completely, press the spring tabs and pull the chassis out of the rack.
CAUTION: Never attempt to install or remove the system chassis from the rack by
yourself.