Dell PowerEdge 2850 Updating Your NIC Teaming Drivers (.pdf)
Dell PowerEdge 2850 Manual
 |
View all Dell PowerEdge 2850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerEdge 2850 manual content summary:
- Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 1
Dell™ PowerEdge™ 1850 and 2850 Systems Upgrading Your System Board and Riser Board www.dell.com | support.dell.com - Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 2
to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc. Other - Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 3
work surface. 4 Remove the system cover. 5 Remove the SCSI backplane board. See "SCSI Backplane Board" in the Service-Only Parts Replacement Procedures guide on support.dell.com. 6 Disconnect the fan power cables. 7 Remove the expansion cards. See "Expansion Cards" in "Installing System Options" in - Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 4
plastic rivet riser board insulator riser board 9 Remove the memory modules. See "System Memory" in "Installing System Options" in your Installation and Troubleshooting Guide. NOTE: While removing the memory modules, record the memory module socket locations to ensure proper installation. 10 If - Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 5
to clear the chassis, then lift the system board out of the system. Figure 1-2. Removing the System Board retention pin slots system board tabs Installing the New System Board and Riser Board 1 Unpack the new system board. 2 Carefully lower the system board into the chassis until the tabs on - Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 6
the fan power cables. 12 Replace the SCSI backplane board and reinstall the SCSI hard drives. See "SCSI Backplane Board" in the Service-Only Parts Replacement Procedures guide on support.dell.com. 13 Reinstall the cover. 14 If applicable, reattach the bezel. 6 Upgrading Your System Board and Riser - Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 7
cover. 10 Remove the memory modules. See "System Memory" in "Installing System Options" in your Installation and Troubleshooting Guide. NOTE: While removing the memory modules, record the memory module socket locations to ensure proper installation on the new system board. 11 Remove the back fans - Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 8
www.dell.com | support.dell.com Figure 1-3. Removing the System Board system board retention pin slots tabs drive-bay retraction bar 17 Remove the front-fan tray: a Press and hold the front-fan tray release button. b Slide the front-fan tray to the right until it stops. c Lift the front-fan tray - Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 9
Installation and Troubleshooting Guide. 16 If applicable, reconnect the RAID battery cable to the riser board. See Figure 1-4. 17 Reinstall the cover. 18 If applicable, reattach the bezel. Upgrading the Dell PowerEdge 2850 Expansion-Card Riser Board 1 If applicable, remove the RAID memory module - Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 10
www.dell.com | support.dell.com Figure 1-4. Removing the Expansion-Card Riser Board From a Dell PowerEdge 2850 System slots tabs RAID memory module connector expansion-card riser board retention pin RAID battery connector expansion-card guide expansion card openings expansion-card guide - Dell PowerEdge 2850 | Updating Your NIC Teaming Drivers (.pdf) - Page 11
- Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 12
Printed in the U.S.A. - Dell PowerEdge 2850 | Updating Your NIC Teaming Drivers (.pdf) - Page 13
- Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 14
Printed in Malaysia. - Dell PowerEdge 2850 | Updating Your NIC Teaming Drivers (.pdf) - Page 15
- Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 16
Printed in Brazil. - Dell PowerEdge 2850 | Updating Your NIC Teaming Drivers (.pdf) - Page 17
- Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 18
Printed in Ireland. - Dell PowerEdge 2850 | Updating Your NIC Teaming Drivers (.pdf) - Page 19
- Dell PowerEdge 2850 | Updating Your NIC Teaming
Drivers (.pdf) - Page 20
Printed in China.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
www.dell.com | support.dell.com
Dell™ PowerEdge™ 1850
and 2850 Systems
Upgrading Your System Board
and Riser Board