Dell PowerEdge 400SC Information Update (.pdf)
Dell PowerEdge 400SC Manual
 |
View all Dell PowerEdge 400SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerEdge 400SC manual content summary:
- Dell PowerEdge 400SC | Information
Update (.pdf) - Page 1
manufacturing mode, the BIOS and CMOS settings are repeatedly lost, the system may not boot correctly, or you will not be able to flash update the BIOS. If the manufacturing mode is on, the following message appears at the top of the screen as the system boots: System Operating in Manufacturing Mode
-
1
 |
 |
www.dell.com | support.dell.com
Turning Off the Manufacturing Mode
The system board is shipped with the manufacturing mode on. You must turn the manufacturing
mode off for your system to operate correctly. If you do not turn off the manufacturing mode, the
BIOS and CMOS settings are repeatedly lost, the system may not boot correctly, or you will not be
able to flash update the BIOS.
If the manufacturing mode is on, the following message appears at the top of the screen as the
system boots:
System Operating in Manufacturing Mode: Press Alt-F to Reboot in
Normal Mode.
To turn the manufacturing mode off, perform the following steps:
1
After the message appears that states the system is operating in the manufacturing mode,
press <Alt><F> to turn off the manufacturing mode.
2
Reboot the system to verify that the manufacturing mode is off.
____________________
Information in this document is subject to change without notice.
© 2004 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc.
is strictly forbidden.
Trademarks used in this text:
Dell
and the
DELL
logo
are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
January 2004
0P4990A00