Dell PowerEdge T140 EMC Technical Specifications
Dell PowerEdge T140 Manual
 |
View all Dell PowerEdge T140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Dell PowerEdge T140 manual content summary:
- Dell PowerEdge T140 | EMC Technical Specifications - Page 1
Dell EMC PowerEdge T140 Technical Specifications Regulatory Model: E59S Series Regulatory Type: E59S001 June 2020 Rev. A06 - Dell PowerEdge T140 | EMC Technical Specifications - Page 2
data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2018 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may - Dell PowerEdge T140 | EMC Technical Specifications - Page 3
...17 4 Getting help...18 Recycling or End-of-Life service information...18 Contacting Dell...18 Accessing system information by using QRL...18 Quick Resource Locator for Dell EMC PowerEdge T140 system 19 Receiving automated support with SupportAssist ...19 5 Safety instructions...20 Contents 3 - Dell PowerEdge T140 | EMC Technical Specifications - Page 4
1 Dell EMC PowerEdge T140 system overview The Dell EMC PowerEdge T140 system is a tower server that supports: • One Intel Xeon, Core i3, Pentium, or Celeron processor • Four DIMM slots • Cabled AC power supply unit • Up to four 3.5-inch cabled SAS or SATA drives. For more information, see the - Dell PowerEdge T140 | EMC Technical Specifications - Page 5
Figure 1. Front view of the system 1. Power button 3. USB 3.0 port 5. Optical drive (optional) 2. System health and ID indicator 4. iDRAC direct micro USB port For more information about the ports, see the Ports and connectors specifications section. Dell EMC PowerEdge T140 system overview 5 - Dell PowerEdge T140 | EMC Technical Specifications - Page 6
the system 1. Security Cable Lock 3. Service Tag, Express Service Code, QRL label 5. PCIe expansion Power supply unit 16. PSU Built-in Self Test (BIST) Button NOTE: For more information about the ports and connectors, see the Ports and connectors specifications section. 6 Dell EMC PowerEdge T140 - Dell PowerEdge T140 | EMC Technical Specifications - Page 7
specifications • Memory specifications • Storage controller specifications • Drive specifications • Ports and connectors specifications • Video specifications • Environmental specifications Chassis dimensions Figure 3. Chassis dimensions Table 1. Dell EMC PowerEdge T140 system dimensions Xa Xb - Dell PowerEdge T140 | EMC Technical Specifications - Page 8
Intel Pentium G5500 processor Intel Celeron G4900 processor PSU specifications The Dell EMC PowerEdge T140 system supports up to one AC cabled power supply unit (PSU). Table 4. Dell EMC PowerEdge T140 PSU specifications PSU Class 365 W AC Gold Heat Frequency dissipation (maximum - Dell PowerEdge T140 | EMC Technical Specifications - Page 9
x1 x4 link in x8 slot NOTE: The expansion cards are not hot swappable. Memory specifications The Dell EMC PowerEdge T140 system supports the following memory specifications for optimized operation: Table 6. Memory specifications DIMM type DIMM rank Single rank DIMM capacity 8 GB Minimum RAM - Dell PowerEdge T140 | EMC Technical Specifications - Page 10
port. • Two USB 3.0-compliant ports • Four USB 2.0-compliant ports Internal USB • One internal USB 3.0-compliant port NIC ports specifications The Dell EMC PowerEdge T140 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports that are located on the back panel. Serial - Dell PowerEdge T140 | EMC Technical Specifications - Page 11
Video specifications The Dell EMC PowerEdge T140 system supports Matrox G200eR2 graphics card with 16 MB capacity. Table 10. Supported video resolution options Resolution Refresh rate 640x480 Datasheet located with the Manuals & Documents on www.dell.com/support/home. Table 11. Temperature - Dell PowerEdge T140 | EMC Technical Specifications - Page 12
Table 15. Maximum altitude specifications Maximum altitude Operating Storage Specifications 3048 m (10,000 ft) 12,000 m (39,370 ft) Table 16. Operating temperature derating specifications Operating temperature derating Specifications Up to 35°C (95°F) Maximum temperature is reduced by 1°C/300 - Dell PowerEdge T140 | EMC Technical Specifications - Page 13
3048 m (10,000 ft). • One non-redundant power supply unit is required. • One system fan required. • Non-Dell qualified peripheral cards and/or peripheral cards greater than 25 W are not supported. • GPU is not supported. • Tape backup unit is not supported. • For a system with 4 TB (or more) drive - Dell PowerEdge T140 | EMC Technical Specifications - Page 14
Table 21. Thermal restrictions matrix(continued) Ambient 25°C Drive No restriction Card No restriction 30°C No restriction No restriction 35°C No restriction No restriction 14 Technical specifications - Dell PowerEdge T140 | EMC Technical Specifications - Page 15
Non-redundant cabled power supply unit indicator codes • PowerEdge T140 system diagnostics System ID button to switch to system ID mode. Blinking blue Indicates that the system ID mode is active. mode. If the problem persists, see the Getting help section. Blinking amber Indicates that the - Dell PowerEdge T140 | EMC Technical Specifications - Page 16
not connected or PSU is faulty. Green A valid power source is connected to the PSU and the PSU is operational. PowerEdge T140 system diagnostics If you experience a problem with your system, run the system diagnostics before contacting Dell for technical assistance. The purpose of running system - Dell PowerEdge T140 | EMC Technical Specifications - Page 17
are completed successfully • View error messages that inform you of problems encountered during testing Running the Embedded System Diagnostics from Boot Manager all the detected devices. Running the Embedded System Diagnostics from the Dell Lifecycle Controller 1. As the system boots, press F10. 2. - Dell PowerEdge T140 | EMC Technical Specifications - Page 18
the Dell EMC PowerEdge T140. Ensure that your smartphone or tablet has the QR code scanner installed. The QRL includes the following information about your system: • How-to videos • Reference materials, including the Installtion and Service Manual, and mechanical overview • Your system service tag - Dell PowerEdge T140 | EMC Technical Specifications - Page 19
Locator for Dell EMC PowerEdge T140 system Figure 7. Quick Resource Locator for Dell EMC PowerEdge T140 system Receiving automated support with SupportAssist Dell EMC SupportAssist is an optional Dell EMC Services offering that automates technical support for your Dell EMC server, storage, and - Dell PowerEdge T140 | EMC Technical Specifications - Page 20
only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
Dell EMC PowerEdge T140
Technical Specifications
Regulatory Model: E59S Series
Regulatory Type: E59S001
June 2020
Rev. A06