Dell PowerEdge T320 Owner's Manual - Page 19
Hard-Drive Indicator Patterns, Drive-Status Indicator Pattern RAID Only - raid driver
View all Dell PowerEdge T320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
PCIe Indicator Condition The indicator blinks amber if a PCIe card experiences an error. Corrective Action Restart the system. Update any required drivers for the PCIe card. Re-install the card. If the problem persists, see Getting Help. Hard-Drive Indicator Patterns Figure 6. Hard-Drive Indicators 1. hard-drive activity indicator (green) 2. hard-drive status indicator (green and amber) NOTE: If the hard drive is in Advanced Host Controller Interface (AHCI) mode, the status indicator (on the right side) does not function and remains off. Drive-Status Indicator Pattern (RAID Only) Blinks green two times per second Off Condition Identifying drive or preparing for removal Drive ready for insertion or removal NOTE: The drive status indicator remains off until all hard drives are initialized after the system is turned on. Drives are not ready for insertion or removal during this time. Blinks green, amber, and off Blinks amber four times per second Blinks green slowly Steady green Blinks green three seconds, amber three seconds, and off six seconds Predicted drive failure Drive failed Drive rebuilding Drive online Rebuild aborted 19