Dell PowerVault MD3200 CLI Guide - Page 131
Create iSCSI Initiator, Create RAID Virtual Disk (Automatic Physical Disk Select)
View all Dell PowerVault MD3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Create iSCSI Initiator This command creates a new iSCSI initiator object. Syntax create iscsiInitiator iscsiName = "iSCSI-ID" userLabel = "name" host = "host-name" [chapSecret = securityKey] Parameters Parameter iscsiName userLabel host chapSecret Description The default identifier of the iSCSI initiator. The name that you want to use for the iSCSI initiator. Enclose the name in double quotation marks (" "). The name of the host in which the iSCSI initiator is installed. The password that you want to use to authenticate a peer connection. NOTE: Challenge Handshake Authentication Protocol (CHAP) is a protocol that authenticates the peer of a connection. CHAP is based upon the peers sharing a "secret." A secret is a security key that is similar to a password. Use chapSecret only for initiators requiring mutual authentication. Create RAID Virtual Disk (Automatic Physical Disk Select) This command creates a disk group across the storage array physical disks, and a new virtual disk in the disk group. The RAID controller modules in the storage array choose the physical disks to include in the virtual disk. Syntax create virtualDisk physicalDiskCount= numberOfPhysicalDisks volumeGroupUserLabel="diskGroupName" raidLevel=(0 | 1 | 5 | 6) userLabel="virtualDiskName" [physicalDiskType=(SAS) Script Commands 131