Dell PowerVault MD3200 CLI Guide - Page 161
Download Storage Array Firmware/NVSRAM
View all Dell PowerVault MD3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Parameters Parameter physicalDisk filename Description Physical disk to which to download the firmware image. Specify the enclosure ID and slot ID for the physical disk. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You must put brackets ([ ]) around the enclosure ID value and slot ID value. File path and file name of the file that contains the firmware image. You must put quotation marks (" ") around the firmware image file path and file name. Download Storage Array Firmware/NVSRAM This command downloads firmware and, optionally, NVSRAM values for the RAID controller module in the storage array. If you want to download only NVSRAM values, use the downLoad storageArray NVSRAM command. Syntax download storageArray firmware [, NVSRAM ] file="filename" [, "NVSRAM-filename"] [downgrade=(TRUE | FALSE)] [activateNow=(TRUE | FALSE)] Parameters Parameter NVSRAM file Description Specifies that you want to download a file with NVSRAM values when you download a firmware file. You must not put brackets around this parameter. Include a comma after the term firmware. File path and name of the file that contains the firmware. Valid file names must end with a .dlp extension. You must put quotation marks (" ") around the file name. Script Commands 161