Dell PowerVault MD3200 CLI Guide - Page 182

Parameter Parameter logFile Description Name of the file to which to write the log sense data. You must put quotation marks (" ") around the file name. Save RAID Controller Module NVSRAM This command saves a copy of the RAID controller module NVSRAM values to a file. This command saves all regions. Syntax save controller [(0 | 1)] NVSRAM file="filename" Parameters Parameter controller file Description RAID controller module with the NVSRAM values to save. Valid RAID controller module identifiers are 0 or 1, where, 0 is the RAID controller module on the left and 1 is the RAID controller module on the right when viewed from the rear of the enclosure. You must put brackets ([ ]) around the RAID controller module identifier. Name of the file in which to save the values. You must put quotation marks (" ") around the file name. Save Storage Array Configuration This command creates a script file that you can use to create the current storage array virtual disk configuration. Syntax save storageArray configuration file="filename" [(allConfig | globalSettings=(TRUE | FALSE) virtualDiskConfigAndSettings=(TRUE | FALSE) hostTopology=(TRUE | FALSE) lunMappings=(TRUE | FALSE))] 182 Script Commands