Dell PowerVault MD3200 CLI Guide - Page 189

Set Enclosure Attribute This command sets user-defined attributes for an enclosure. Syntax set enclosure [enclosureID] (chassisName | assetTag)= "userID" Parameters Parameter enclosureID chassisName assetTag Description Identifies a specific enclosure for which to set the attribute. Enclosure ID values are 0 to 99. You must put brackets ([ ]) around the enclosure ID value. Chassis name or number to give the new enclosure. Chassis names can be any combination of alphanumeric characters with a maximum length of 32 characters. Alphabetical characters can be uppercase or lowercase. You can also use the underscore character (_) and the hyphen (-) character. You cannot use spaces in a chassis name. You must put quotation marks (" ") around the chassis name. Asset tag name or number to give the new enclosure. Asset tags can be any combination of alphanumeric characters with a maximum length of ten characters. Alphabetical characters can be uppercase or lowercase. You can also use the underscore character (_) and the hyphen (-) character. You cannot use spaces in an asset tag name. You must put quotation marks (" ") around the asset tag name. Set Enclosure Identification This command sets the ID of an enclosure in a storage array. Syntax set enclosure ["Service Tag"] id=enclosureID Script Commands 189