Dell PowerVault MD3200 CLI Guide - Page 200
Set RAID Controller Module, IPv6RouterAddress=ipv6Address
View all Dell PowerVault MD3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Set RAID Controller Module This command defines the attributes for the RAID controller modules. Syntax set controller [(0 | 1)] availability=(online | offline | serviceMode) | ethernetPort [(1 | 2)]=ethernetPortOptions | globalNVSRAMByte [nvsramOffset]= (nvsramByteSetting | nvsramBitSetting) | hostNVSRAMByte [hostType, nvsramOffset]= (nvsramByteSetting | nvsramBitSetting) | IPv4GatewayIP=ipAddress | IPv6RouterAddress=ipv6Address | iscsiHostPort [(1 | 2 | 3 | 4)]= iscsiHostPortOptions rloginEnabled=(TRUE | FALSE) | serviceAllowedIndicator=(on | off) Parameters Parameter controller availability Description The RAID controller module for which you want to define properties. Valid identifiers for the RAID controller module are 0 or 1, where, 0 is the RAID controller module in slot 0, and 1 is the RAID controller module in slot 1. Enclose the identifier for the RAID controller module in square brackets ([ ]). If you do not specify a RAID controller module, the firmware for the RAID controller module returns a syntax error. The mode for the RAID controller module, which you can set to online, offline, or serviceMode (service). 200 Script Commands