Dell PowerVault MD3200 CLI Guide - Page 217

Set Storage Array Time This command sets the clocks on both RAID controller modules in a storage array by synchronizing the RAID controller module clocks with the clock of the host from which you run this command. Syntax set storageArray time Parameters None. Set Storage Array Unnamed Discovery Session This command enables the storage array to participate in unnamed discovery sessions. Syntax set storageArray unnamedDiscoverySession=(TRUE | FALSE) Parameter Parameter Description unnamedDiscoverySession This parameter turns on or turns off unnamed discovery sessions. Set the parameter to TRUE to turn on unnamed discovery sessions. Set the parameter to FALSE to turn off unnamed discovery sessions. NOTE: Discovery is the process where initiators determine the targets that are available. Discovery occurs at power-on/initialization and also if the bus topology changes, for example, if an extra device is added. NOTE: An unnamed discovery session is a discovery session that is established without specifying a target ID in the login request. For unnamed discovery sessions, neither the target ID nor the target portal group ID are available to the targets. Script Commands 217