Dell PowerVault MD3200 CLI Guide - Page 218
Set Virtual Disk, Syntax Applicable to One or More Virtual Disks
View all Dell PowerVault MD3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Set Virtual Disk This command defines the properties for a virtual disk. You can use most of the parameters to define properties for one or more virtual disks, however, some of the parameters define properties for only one virtual disk at a time. The syntax definitions are separated to show which parameters apply to several virtual disks and which apply to only one virtual disk. The syntax for virtual disk mapping is listed separately. Syntax Applicable to One or More Virtual Disks set (allVirtualDisks | virtualDisk ["virtualDiskName"] | virtualDisks ["virtualDiskName1" ... "virtualDiskNameN"] | virtualDisk ) cacheFlushModifier=cacheFlushModifierValue cacheWithoutBatteryEnabled=(TRUE | FALSE)\ mediaScanEnabled=(TRUE | FALSE) mirrorCacheEnabled=(TRUE | FALSE) modificationPriority=(highest | high | medium | low | lowest) owner=(0 | 1) readCacheEnabled=(TRUE | FALSE) writeCacheEnabled=(TRUE | FALSE) cacheReadPrefetch=(TRUE | FALSE) CAUTION: Enabling Write Cache on a virtual disk generally improves performance for applications with significant Write content (unless the application features a continuous string of Writes. However, Write Cache does introduce some risk of data loss in the unlikely event of a controller failure. Syntax Applicable to Only One Virtual Disk set (virtualDisk ["virtualDiskName"] | virtualDisk ) addCapacity=virtualDiskCapacity [addPhysicalDisks=(enclosureID1,slotID1 enclosureID2,slotID2 ... enclosureIDn,slotIDn)] consistencyCheckEnabled=(TRUE | FALSE) 218 Script Commands