Dell PowerVault MD3200 CLI Guide - Page 232
Show RAID Controller Module NVSRAM, a list of all NVSRAM byte values.
View all Dell PowerVault MD3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
Parameters Parameter Description allControllers Returns information about both RAID controller modules in the storage array. controller Returns information about a specific RAID controller module in the storage array. Valid RAID controller module identifiers are 0 or 1, where, 0 is the RAID controller module on the left and 1 is the RAID controller module on the right when viewed from the rear of the enclosure. You must put brackets ([ ]) around the RAID controller module identifier. summary Returns a concise list of information about both RAID controller modules in the storage array. Show RAID Controller Module NVSRAM This command returns a list of the NVSRAM byte values for the specified host type. If you do not enter the optional parameters, this command returns a list of all NVSRAM byte values. Syntax show (allControllers | controller [(0 | 1)]) NVSRAM [hostType=(hostTypeIndexLabel | host= "hostName")] 232 Script Commands