Dell PowerVault MD3200 CLI Guide - Page 236
cacheReadPrefetch=TRUE | FALSE, physicalDiskType=SAS | SATA
View all Dell PowerVault MD3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Syntax show storageArray autoConfiguration [physicalDiskType=(SAS | SATA) raidLevel=(0 | 1 | 5 | 6) diskGroupWidth=numberOfPhysicalDisks diskGroupCount=numberOfDiskGroups virtualDisksPerGroupCount=hotSpareCount= numberOfHotspares segmentSize=segmentSizeValue cacheReadPrefetch=(TRUE | FALSE) securityType=(none | capable | enabled)] Parameters Parameter Description physicalDiskType Type of physical disk to use for the storage array. Valid physical disk types are SAS or SATA. The physicalDiskType parameter is not required if only one type of physical disk is in the storage array. This parameter is not required if only one type of physical disk is in the storage array. raidLevel RAID level of the disk group that contains the physical disks in the storage array. Valid RAID levels are 0, 1, 5 or 6. diskGroupWidth Number of physical disks in a disk group in the storage array. This number depends on the capacity of the physical disks. Integer values are required. For information about the number of physical disks that you can use in a disk group, see "Enclosure Loss Protection" on page 52. diskGroupCount Number of disk groups in the storage array. Use integer values. virtualDisksPerGrou Number of equal-capacity virtual disks per disk group. pCount Use integer values. hotSpareCount Number of hot spares desired in the storage array. Use integer values. For information about hot spares, see "Assigning Global Hot Spares" on page 59. 236 Script Commands