Dell PowerVault MD3200 CLI Guide - Page 248
Start Disk Group Export, set diskGroup forceState
View all Dell PowerVault MD3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
Start Disk Group Export This command moves a disk group into an Exported state. Then you can remove the physical disks that comprise the disk group and reinstall the physical disks in a different storage array. NOTE: Within the disk group, you cannot move virtual disks that are associated with the premium features from one storage array to another storage array. Syntax start diskGroup [diskGroupName] export Parameter Parameter diskGroup Description Number of the disk group to defragment. You must put brackets ([ ]) around the disk group number. Additional Information When this command is successful, you can run the start diskGroup import command to finish moving the disk group to a Complete state, which makes the disk group available to the new storage array. If this command is unsuccessful because hardware problems prevented the completion of the export, use the set diskGroup forceState command. The set diskGroup forceState command lets you use the start diskGroup import command to import a disk group. After the disk group is in an Exported state or a Forced state, you can remove the physical disks that comprise the disk group from the storage array. You can reinstall the physical disks in a different storage array. 248 Script Commands