Dell PowerVault MD3200 CLI Guide - Page 251

Start Physical Disk Blink This command blinks a physical disk by turning on an indicator light on the physical disk. Run the stop physicalDisk blink command to turn off the indicator light on the physical disk. Syntax start physicalDisk [enclosureID,slotID] blink Parameter Parameter Description physicalDisk The location of the physical disk that you want to find. For highcapacity expansion enclosures, specify the enclosure ID value and the slot ID value of the physical disk that you want to revive. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. Enclose the enclosure ID value and the slot ID value in square brackets ([ ]). Start Physical Disk Channel Blink This command identifies the expansion enclosures that are connected to a specific physical disk port by turning on the indicator lights for the expansion enclosure that is connected to the physical disk port. Use the stop physicalDiskChannel blink command to turn off the indicator lights on the expansion enclosure. Syntax start physicalDiskChannel [(1 | 2 )] blink Parameter Parameter Description physicalDisk The identifier number of the physical disk channel that you want Channel to locate. Valid values for the identifier number are 1 or 2. Enclose the identifier number in square brackets ([ ]). Script Commands 251