Dell PowerVault MD3200 CLI Guide - Page 254
Start Physical Disk Reconstruction, Start Secure Physical Disk Erase
View all Dell PowerVault MD3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
Start Physical Disk Reconstruction This command starts reconstructing a physical disk. Syntax start physicalDisk [enclosureID,slotID] reconstruct Parameters Parameter physicalDisk Description Identifies the enclosure and slot where the physical disk resides. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. You must put brackets ([ ]) around the enclosure ID value and slot ID value. Start Secure Physical Disk Erase This command erases all of the data from one or more self encrypting disk (SED) physical disks so that they can be reused as SED physical disks. Run this command only when the SED physical disks are no longer part of a secure disk group, or when the security key is unknown. NOTE: When performing a secure erase operation on all physical disks in an array that contains only SED physical disk type, the physical disks should be erased in two groups using the start secureErase physicalDisks[] command. For example, if there are seven (7) SED physical disks, the secure erase can be performed by executing: start secureErase physicalDisks [0,0 0,1 0,2 0,3]; start secureErase physicalDisks [0,4 0,5 0,6]; Syntax start secureErase (physicalDisk [enclosureID,slotID] | physicalDisks [enclosureID1,slotID1 enclosureID2, slotID2 ... enclosureIDn,slotIDn]) 254 Script Commands