Dell PowerVault MD3200 CLI Guide - Page 264

A Sample Script Files This appendix provides sample scripts for configuring a storage array. These examples show how the script commands appear in a complete script file. You can copy these scripts and modify them to create a configuration unique to your storage array. Create a script file in two ways: • Use the save storageArray configuration command • Write a script By using the save storageArray configuration command, you can create a file to use to copy an existing configuration from one storage array to other storage arrays. You can also use this file to restore an existing configuration that has become corrupted. You can also copy an existing file to serve as a pattern from which you create a new script file by modifying portions of the original file. The default file extension is .scr. Create a new script file using a text editor, such as Microsoft® Notepad. The maximum line length is 256 characters. The command syntax must conform to the guidelines in "Usage Guidelines" on page 40 and the rules in "Command Formatting Rules" on page 106. When creating a new script file, use any file name and extension that runs on the host operating system. To run a script file from the command line, enter the following text: client>smcli 123.45.67.89 -f scriptfile.scr; Configuration Script Example 1 This example creates a new virtual disk using the create virtualDisk command in the free space of a disk group. Show "Create RAID 5 Virtual Disk 7 on existing Disk Group 1"; //Create virtual disk on a disk group created by the create virtual disk command Sample Script Files 263