Dell PowerVault NX3500 Administrator's Guide - Page 36
Completing the NAS System Setup Worksheet, Preparing Your Management Station
View all Dell PowerVault NX3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Completing the NAS System Setup Worksheet The NAS System Setup Worksheet appended at the end of this document will assist you in the overall setup and configuration of your solution. See "NAS Setup Worksheet" on page 197. NOTE: It is recommended that you take a print out of the worksheet attached in the end of this document. This will assist you in the overall setup and configuration of your solution. Preparing Your Management Station A management station is required to manage and configure the PowerVault NX3500. The solution can be accessed using either the CLI or the NAS Manager. NOTE: Only one login at a time is allowed for both the CLI and the NAS Manager. Ensure that you are not logged on to both the CLI or the NAS Manager at the same time or attempt multiple logins. The minimum requirements for the management station are: • It must have IPv6 enabled. • The PowerVault NAS configuration utility is installed. NOTE: You can install Dell PowerVault NAS Configuration Utility from the Dell Resource Media Dell Scalable File System (DSFS) DVD that shipped with your solution. • The PowerVault NX3500 is cabled appropriately, and the management station is on the same network as the LAN/client network. • Has either Internet Explorer or Firefox installed with Java Script enabled. Preparing Your MD Storage Solution This section assumes you have discovered and completed the initial configuration (naming, assigning iSCSI, and management port IPs) of your PowerVault MD3xx0i storage arrays in accordance with the topology you plan to use. 36 Setting Up Your PowerVault NX3500 Solution